
Hi Eric,
On 02/10/2014 21:16, Eric Nelson wrote:
This collection of patches comprises a set of updates that have been lingering in our Github repository.
We're pushing them to main-line in preparation for the addition of a couple of boards that have also been lingering for a while.
Patches 1-9 are tweaks to the mx6qsabrelite/nitrogen6x initialization code.
Patches 10-18 add support for additional displays supported by the board(s) and tweak the HDMI detection.
Patches 19-32 enable and configure various features through changes to include/configs/nitrogen6x.h.
Patches are orthogonal and can be applied separetely. I have not seen any comments and I have not comments for most of them. I will start to apply the ones (most of them) are straightforward. Please wait until I end up with first pass - your next version will be much shorter !
Diego Rondini (1): nitrogen6x: config: allow boot to USB stick
Eric Nelson (24): nitrogen6x: implement board_cfb_skip() to disable text output nitrogen6x: configure SD2 pads for SDIO on USDHC2 nitrogen6x: power-down miscellanous peripherals nitrogen6x: staticize board file nitrogen6x: Allow U-Boot to be silent on UART2 nitrogen6x: prevent warnings about board_ehci* callbacks nitrogen6x: display: add qvga panel nitrogen6x: display: add support for LG-9.7 LVDS display nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays nitrogen6x: display: add support for fusion 7 display nitrogen6x: display: add svga display (800x600) nitrogen6x: display: add Ampire 1024x600 panel nitrogen6x: display: add wvga-lvds panel nitrogen6x: display use I2C detect for HDMI nitrogen6x: config: add USB Mass Storage (ums) support nitrogen6x: config: add initrd_high nitrogen6x: config: expose SATA, then MMC over USB nitrogen6x: config: enable USB keyboard support nitrogen6x: config: add CONFIG_CMD_MEMTEST nitrogen6x: config: enable "i2c edid" nitrogen6x: config: disable logo nitrogen6x: config: configure usb_ether
Mainly I have problems with fixed addresses - my comments to the related patch.
Best regards, Stefano Babic