Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0
The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1] describes interfaces (ABIs) that standardize communication between the Secure World and Normal World leveraging TrustZone technology.
This driver uses 64-bit registers as per SMCCCv1.2 spec and comes on top of the SMCCC layer. The driver provides the FF-A ABIs needed for querying the FF-A framework from the secure world.
The driver uses SMC32 calling convention which means using the first 32-bit data of the Xn registers.
All supported ABIs come with their 32-bit version except FFA_RXTX_MAP which has 64-bit version supported.
Both 32-bit and 64-bit direct messaging are supported which allows both 32-bit and 64-bit clients to use the FF-A bus.
FF-A is a discoverable bus and similar to architecture features. FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by the PSCI driver.
Clients are able to probe then use the FF-A bus by calling the DM class searching APIs (e.g: uclass_first_device).
The Secure World is considered as one entity to communicate with using the FF-A bus. FF-A communication is handled by one device and one instance (the bus). This FF-A driver takes care of all the interactions between Normal world and Secure World.
The driver exports its operations to be used by upper layers.
Exported operations:
- ffa_partition_info_get - ffa_sync_send_receive - ffa_rxtx_unmap
Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). Arm specific methods are implemented in the Arm driver (arm-ffa.c).
For more details please refer to the driver documentation [2].
[1]: https://developer.arm.com/documentation/den0077/latest/ [2]: doc/arch/arm64.ffa.rst
Signed-off-by: Abdellatif El Khlifi abdellatif.elkhlifi@arm.com Cc: Tom Rini trini@konsulko.com Cc: Simon Glass sjg@chromium.org Cc: Ilias Apalodimas ilias.apalodimas@linaro.org Cc: Jens Wiklander jens.wiklander@linaro.org Cc: Heinrich Schuchardt xypron.glpk@gmx.de
--- Changelog: ===============
v12:
* remove dscvry_info * replace dscvry_info.invoke_ffa_fn() with a weak invoke_ffa_fn (user drivers can override it) * improve FFA_PARTITION_INFO_GET implementation (clients no longer need to calloc a buffer) * address nits
v11:
* move ffa_try_discovery() from the uclass to the Arm FF-A driver * rename ffa_try_discovery() to arm_ffa_discover() * pass dev as an argument of arm_ffa_discover() * add arm_ prefix to the Arm FF-A driver functions * add emul field in struct ffa_discovery_info * address nits
v10:
* provide the driver operations through the Uclass * move the generic FF-A methods to the Uclass * keep Arm specific methods in the Arm driver (arm-ffa.c) * rename core.c to arm-ffa.c * address nits
v9:
* integrate the FF-A bus discovery in the DM and use ARM_SMCCC_FEATURES for binding
v8:
* make ffa_get_partitions_info() second argument to be an SP count in both modes * update ffa_bus_prvdata_get() to return a pointer rather than a pointer address * remove packing from ffa_partition_info and ffa_send_direct_data structures * pass the FF-A bus device to the bus operations
v7:
* add support for 32-bit direct messaging * rename be_uuid_str_to_le_bin() to uuid_str_to_le_bin() * improve the declaration of error handling mapping * stating in doc/arch/arm64.ffa.rst that EFI runtime is not supported
v6:
* drop use of EFI runtime support (We decided with Linaro to add this later) * drop discovery from initcalls (discovery will be on demand by FF-A users) * set the alignment of the RX/TX buffers to the larger translation granule size * move FF-A RX/TX buffers unmapping at ExitBootServices() to a separate commit * update the documentation and move it to doc/arch/arm64.ffa.rst
v4:
* add doc/README.ffa.drv * moving the FF-A driver work to drivers/firmware/arm-ffa * use less #ifdefs in lib/efi_loader/efi_boottime.c and replace #if defined by #if CONFIG_IS_ENABLED * improving error handling by mapping the FF-A errors to standard errors and logs * replacing panics with an error log and returning an error code * improving features discovery in FFA_FEATURES by introducing rxtx_min_pages private data field * add ffa_remove and ffa_unbind functions * improve how the driver behaves when bus discovery is done more than once
v3:
* align the interfaces of the U-Boot FF-A driver with those in the linux FF-A driver * remove the FF-A helper layer * make the U-Boot FF-A driver independent from EFI * provide an optional config that enables copying the driver data to EFI runtime section at ExitBootServices service * use 64-bit version of FFA_RXTX_MAP, FFA_MSG_SEND_DIRECT_{REQ, RESP}
v2:
* make FF-A bus discoverable using device_{bind, probe} APIs * remove device tree support
v1:
* introduce FF-A bus driver with device tree support
MAINTAINERS | 8 + doc/arch/arm64.ffa.rst | 247 ++++ doc/arch/index.rst | 1 + drivers/Makefile | 1 + drivers/firmware/Kconfig | 1 + drivers/firmware/arm-ffa/Kconfig | 36 + drivers/firmware/arm-ffa/Makefile | 8 + drivers/firmware/arm-ffa/arm-ffa-uclass.c | 1065 +++++++++++++++++ drivers/firmware/arm-ffa/arm-ffa.c | 104 ++ .../firmware/arm-ffa/sandbox_arm_ffa_priv.h | 14 + include/arm_ffa.h | 213 ++++ include/arm_ffa_priv.h | 246 ++++ include/dm/uclass-id.h | 6 + 13 files changed, 1950 insertions(+) create mode 100644 doc/arch/arm64.ffa.rst create mode 100644 drivers/firmware/arm-ffa/Kconfig create mode 100644 drivers/firmware/arm-ffa/Makefile create mode 100644 drivers/firmware/arm-ffa/arm-ffa-uclass.c create mode 100644 drivers/firmware/arm-ffa/arm-ffa.c create mode 100644 drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h create mode 100644 include/arm_ffa.h create mode 100644 include/arm_ffa_priv.h
diff --git a/MAINTAINERS b/MAINTAINERS index 926c7201a5..4e285f88cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -266,6 +266,14 @@ F: drivers/net/cortina_ni.h F: drivers/net/phy/ca_phy.c F: configs/cortina_presidio-asic-pnand_defconfig
+ARM FF-A +M: Abdellatif El Khlifi abdellatif.elkhlifi@arm.com +S: Maintained +F: doc/arch/arm64.ffa.rst +F: drivers/firmware/arm-ffa/ +F: include/arm_ffa.h +F: include/sandbox_arm_ffa.h + ARM FREESCALE IMX M: Stefano Babic sbabic@denx.de M: Fabio Estevam festevam@gmail.com diff --git a/doc/arch/arm64.ffa.rst b/doc/arch/arm64.ffa.rst new file mode 100644 index 0000000000..7719215cdf --- /dev/null +++ b/doc/arch/arm64.ffa.rst @@ -0,0 +1,247 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Arm FF-A Support +================ + +Summary +------- + +FF-A stands for Firmware Framework for Arm A-profile processors. + +FF-A specifies interfaces that enable a pair of software execution environments aka partitions to +communicate with each other. A partition could be a VM in the Normal or Secure world, an +application in S-EL0, or a Trusted OS in S-EL1. + +The U-Boot FF-A support (the bus) implements the interfaces to communicate +with partitions in the Secure world aka Secure partitions (SPs). + +The FF-A support specifically focuses on communicating with SPs that +isolate portions of EFI runtime services that must run in a protected +environment which is inaccessible by the Host OS or Hypervisor. +Examples of such services are set/get variables. + +The FF-A support uses the SMC ABIs defined by the FF-A specification to: + +- Discover the presence of SPs of interest +- Access an SP's service through communication protocols + e.g. EFI MM communication protocol + +At this stage of development only EFI boot-time services are supported. +Runtime support will be added in future developments. + +The U-Boot FF-A support provides the following parts: + +- A Uclass driver providing generic FF-A methods. +- An Arm FF-A device driver providing Arm-specific methods and reusing the Uclass methods. + +FF-A and SMC specifications +------------------------------------------- + +The current implementation of the U-Boot FF-A support relies on +`FF-A v1.0 specification`_ and uses SMC32 calling convention which +means using the first 32-bit data of the Xn registers. + +At this stage we only need the FF-A v1.0 features. + +The FF-A support has been tested with OP-TEE which supports SMC32 calling +convention. + +Hypervisors are supported if they are configured to trap SMC calls. + +The FF-A support uses 64-bit registers as per `SMC Calling Convention v1.2 specification`_. + +Supported hardware +-------------------------------- + +Aarch64 plaforms + +Configuration +---------------------- + +CONFIG_ARM_FFA_TRANSPORT + Enables the FF-A support. Turn this on if you want to use FF-A + communication. + When using an Arm 64-bit platform, the Arm FF-A driver will be used. + +FF-A ABIs under the hood +--------------------------------------- + +Invoking an FF-A ABI involves providing to the secure world/hypervisor the +expected arguments from the ABI. + +On an Arm 64-bit platform, the ABI arguments are stored in x0 to x7 registers. +Then, an SMC instruction is executed. + +At the secure side level or hypervisor the ABI is handled at a higher exception +level and the arguments are read and processed. + +The response is put back through x0 to x7 registers and control is given back +to the U-Boot Arm FF-A driver (non-secure world). + +The driver reads the response and processes it accordingly. + +This methodology applies to all the FF-A ABIs. + +FF-A bus discovery on Arm 64-bit platforms +--------------------------------------------- + +When CONFIG_ARM_FFA_TRANSPORT is enabled, the FF-A bus is considered as +an architecture feature and discovered using ARM_SMCCC_FEATURES mechanism. +This discovery mechanism is performed by the PSCI driver. + +The PSCI driver comes with a PSCI device tree node which is the root node for all +architecture features including FF-A bus. + +:: + + => dm tree + + Class Index Probed Driver Name + ----------------------------------------------------------- + ... + firmware 0 [ + ] psci |-- psci + ffa 0 [ ] arm_ffa | `-- arm_ffa + ... + +The PSCI driver is bound to the PSCI device and when probed it tries to discover +the architecture features by calling a callback the features drivers provide. + +In case of FF-A, the callback is arm_ffa_is_supported() which tries to discover the +FF-A framework by querying the FF-A framework version from secure world using +FFA_VERSION ABI. When discovery is successful, the ARM_SMCCC_FEATURES +mechanism creates a U-Boot device for the FF-A bus and binds the Arm FF-A driver +with the device using device_bind_driver(). + +At this stage the FF-A bus is registered with the DM and can be interacted with using +the DM APIs. + +Clients are able to probe then use the FF-A bus by calling uclass_first_device(). +Please refer to the armffa command implementation as an example of how to probe +and interact with the FF-A bus. + +When calling uclass_first_device(), the FF-A driver is probed and ends up calling +ffa_do_probe() provided by the Uclass which does the following: + + - saving the FF-A framework version in uc_priv + - querying from secure world the u-boot endpoint ID + - querying from secure world the supported features of FFA_RXTX_MAP + - mapping the RX/TX buffers + - querying from secure world all the partitions information + +When one of the above actions fails, probing fails and the driver stays not active +and can be probed again if needed. + +FF-A device destruction +------------------------- + +When the FF-A device is removed by the DM, RX/TX buffers are automatically +unmapped and freed. + +For example, at EFI efi_exit_boot_services() active devices are automatically removed +by dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL). + +By consequence, the FF-A RX/TX are unmapped automatically. + +Requirements for clients +------------------------------------- + +When using the FF-A bus with EFI, clients must query the SPs they are looking for +during EFI boot-time mode using the service UUID. + +The RX/TX buffers are only available at EFI boot-time. Querying partitions is +done at boot time and data is cached for future use. + +RX/TX buffers should be unmapped before EFI runtime mode starts. +The driver provides a bus operation for that called ffa_rxtx_unmap() and this is done +automatically at efi_exit_boot_services(). + +The Linux kernel allocates its own RX/TX buffers. To be able to register these kernel buffers +with secure world, the U-Boot's RX/TX buffers should be unmapped before EFI runtime starts. + +When invoking FF-A direct messaging, clients should specify which ABI protocol +they want to use (32-bit vs 64-bit). Selecting the protocol means using +the 32-bit or 64-bit version of FFA_MSG_SEND_DIRECT_{REQ, RESP}. +The calling convention between U-Boot and the secure world stays the same: SMC32. + +Requirements for user drivers +------------------------------------- + +Users who want to implement their custom FF-A device driver while reusing the FF-A Uclass can do so +by implementing their own invoke_ffa_fn() in the user driver. + +The bus driver layer +------------------------------ + +FF-A support comes on top of the SMCCC layer and is implemented by the FF-A Uclass drivers/firmware/arm-ffa/arm-ffa-uclass.c + +The following features are provided: + +- Support for the 32-bit version of the following ABIs: + + - FFA_VERSION + - FFA_ID_GET + - FFA_FEATURES + - FFA_PARTITION_INFO_GET + - FFA_RXTX_UNMAP + - FFA_RX_RELEASE + - FFA_RUN + - FFA_ERROR + - FFA_SUCCESS + - FFA_INTERRUPT + - FFA_MSG_SEND_DIRECT_REQ + - FFA_MSG_SEND_DIRECT_RESP + +- Support for the 64-bit version of the following ABIs: + + - FFA_RXTX_MAP + - FFA_MSG_SEND_DIRECT_REQ + - FFA_MSG_SEND_DIRECT_RESP + +- Processing the received data from the secure world/hypervisor and caching it + +- Hiding from upper layers the FF-A protocol and registers details. Upper + layers focus on exchanged data, FF-A support takes care of how to transport + that to the secure world/hypervisor using FF-A + +- FF-A support provides driver operations to be used by upper layers: + + - ffa_partition_info_get + - ffa_sync_send_receive + - ffa_rxtx_unmap + +- FF-A bus discovery makes sure FF-A framework is responsive and compatible + with the driver + +- FF-A bus can be compiled and used without EFI + +Example of boot logs with FF-A enabled +-------------------------------------- + +For example, when using FF-A with Corstone-1000 the logs are as follows: + +:: + + U-Boot 2023.01 (May 10 2023 - 11:08:07 +0000) corstone1000 aarch64 + + DRAM: 2 GiB + Arm FF-A framework discovery + FF-A driver 1.0 + FF-A framework 1.0 + FF-A versions are compatible + ... + FF-A driver 1.0 + FF-A framework 1.0 + FF-A versions are compatible + EFI: MM partition ID 0x8003 + ... + EFI stub: Booting Linux Kernel... + ... + Linux version 6.1.9-yocto-standard (oe-user@oe-host) (aarch64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.202301193 + Machine model: ARM Corstone1000 FPGA MPS3 board + +Contributors +------------ + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + +.. _`FF-A v1.0 specification`: https://documentation-service.arm.com/static/5fb7e8a6ca04df4095c1d65e +.. _`SMC Calling Convention v1.2 specification`: https://documentation-service.arm.com/static/5f8edaeff86e16515cdbe4c6 diff --git a/doc/arch/index.rst b/doc/arch/index.rst index b8da4b8c8e..2f916f4026 100644 --- a/doc/arch/index.rst +++ b/doc/arch/index.rst @@ -8,6 +8,7 @@ Architecture-specific doc
arc arm64 + arm64.ffa m68k mips nios2 diff --git a/drivers/Makefile b/drivers/Makefile index 29be78a3f2..6094fac50d 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -114,6 +114,7 @@ obj-y += iommu/ obj-y += smem/ obj-y += thermal/ obj-$(CONFIG_TEE) += tee/ +obj-$(CONFIG_ARM_FFA_TRANSPORT) += firmware/arm-ffa/ obj-y += axi/ obj-y += ufs/ obj-$(CONFIG_W1) += w1/ diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index eae1c8ddc9..8789b1ea14 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -45,4 +45,5 @@ config ARM_SMCCC_FEATURES the PSCI driver is always probed and binds dirvers registered to the Arm SMCCC services if any and reported as supported by the SMCCC firmware.
+source "drivers/firmware/arm-ffa/Kconfig" source "drivers/firmware/scmi/Kconfig" diff --git a/drivers/firmware/arm-ffa/Kconfig b/drivers/firmware/arm-ffa/Kconfig new file mode 100644 index 0000000000..9200c8028b --- /dev/null +++ b/drivers/firmware/arm-ffa/Kconfig @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 + +config ARM_FFA_TRANSPORT + bool "Enable Arm Firmware Framework for Armv8-A driver" + depends on DM && ARM64 + select ARM_SMCCC + select ARM_SMCCC_FEATURES + select LIB_UUID + select DEVRES + help + The Firmware Framework for Arm A-profile processors (FF-A) + describes interfaces (ABIs) that standardize communication + between the Secure World and Normal World leveraging TrustZone + technology. + + The FF-A support in U-Boot is based on FF-A specification v1.0 and uses SMC32 + calling convention. + + FF-A specification: + + https://developer.arm.com/documentation/den0077/a/?lang=en + + In U-Boot FF-A design, FF-A is considered as a discoverable bus. + FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed + by the PSCI driver. + The Secure World is considered as one entity to communicate with + using the FF-A bus. + FF-A communication is handled by one device and one instance (the bus). + The FF-A support on U-Boot takes care of all the interactions between Normal + world and Secure World. + + Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c). + Arm specific methods are implemented in the Arm driver (arm-ffa.c). + + For more details about the FF-A support, please refer to doc/arch/arm64.ffa.rst + diff --git a/drivers/firmware/arm-ffa/Makefile b/drivers/firmware/arm-ffa/Makefile new file mode 100644 index 0000000000..11b1766285 --- /dev/null +++ b/drivers/firmware/arm-ffa/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com +# +# Authors: +# Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + +obj-y += arm-ffa-uclass.o arm-ffa.o diff --git a/drivers/firmware/arm-ffa/arm-ffa-uclass.c b/drivers/firmware/arm-ffa/arm-ffa-uclass.c new file mode 100644 index 0000000000..ffa9d81fa7 --- /dev/null +++ b/drivers/firmware/arm-ffa/arm-ffa-uclass.c @@ -0,0 +1,1065 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com + * + * Authors: + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + */ +#include <common.h> +#include <arm_ffa.h> +#include <arm_ffa_priv.h> +#include <dm.h> +#include <log.h> +#include <malloc.h> +#include <string.h> +#include <uuid.h> +#include <asm/global_data.h> +#include <dm/device-internal.h> +#include <dm/devres.h> +#include <dm/root.h> +#include <linux/errno.h> +#include <linux/sizes.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Error mapping declarations */ + +int ffa_to_std_errmap[MAX_NUMBER_FFA_ERR] = { + [NOT_SUPPORTED] = -EOPNOTSUPP, + [INVALID_PARAMETERS] = -EINVAL, + [NO_MEMORY] = -ENOMEM, + [BUSY] = -EBUSY, + [INTERRUPTED] = -EINTR, + [DENIED] = -EACCES, + [RETRY] = -EAGAIN, + [ABORTED] = -ECANCELED, +}; + +static struct ffa_abi_errmap err_msg_map[FFA_ERRMAP_COUNT] = { + [FFA_ID_TO_ERRMAP_ID(FFA_VERSION)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: A Firmware Framework implementation does not exist", + }, + }, + [FFA_ID_TO_ERRMAP_ID(FFA_ID_GET)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: This function is not implemented at this FF-A instance", + }, + }, + [FFA_ID_TO_ERRMAP_ID(FFA_FEATURES)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: FFA_RXTX_MAP is not implemented at this FF-A instance", + }, + }, + [FFA_ID_TO_ERRMAP_ID(FFA_PARTITION_INFO_GET)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: This function is not implemented at this FF-A instance", + [INVALID_PARAMETERS] = + "INVALID_PARAMETERS: Unrecognized UUID", + [NO_MEMORY] = + "NO_MEMORY: Results cannot fit in RX buffer of the caller", + [BUSY] = + "BUSY: RX buffer of the caller is not free", + [DENIED] = + "DENIED: Callee is not in a state to handle this request", + }, + }, + [FFA_ID_TO_ERRMAP_ID(FFA_RXTX_UNMAP)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: FFA_RXTX_UNMAP is not implemented at this FF-A instance", + [INVALID_PARAMETERS] = + "INVALID_PARAMETERS: No buffer pair registered on behalf of the caller", + }, + }, + [FFA_ID_TO_ERRMAP_ID(FFA_RX_RELEASE)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: FFA_RX_RELEASE is not implemented at this FF-A instance", + [DENIED] = + "DENIED: Caller did not have ownership of the RX buffer", + }, + }, + [FFA_ID_TO_ERRMAP_ID(FFA_RXTX_MAP)] = { + { + [NOT_SUPPORTED] = + "NOT_SUPPORTED: This function is not implemented at this FF-A instance", + [INVALID_PARAMETERS] = + "INVALID_PARAMETERS: Field(s) in input parameters incorrectly encoded", + [NO_MEMORY] = + "NO_MEMORY: Not enough memory", + [DENIED] = + "DENIED: Buffer pair already registered", + }, + }, +}; + +/** + * ffa_to_std_errno() - convert FF-A error code to standard error code + * @ffa_errno: Error code returned by the FF-A ABI + * + * Map the given FF-A error code as specified + * by the spec to a u-boot standard error code. + * + * Return: + * + * The standard error code on success. . Otherwise, failure + */ +static int ffa_to_std_errno(int ffa_errno) +{ + int err_idx = -ffa_errno; + + /* Map the FF-A error code to the standard u-boot error code */ + if (err_idx > 0 && err_idx < MAX_NUMBER_FFA_ERR) + return ffa_to_std_errmap[err_idx]; + return -EINVAL; +} + +/** + * ffa_print_error_log() - print the error log corresponding to the selected FF-A ABI + * @ffa_id: FF-A ABI ID + * @ffa_errno: Error code returned by the FF-A ABI + * + * Map the FF-A error code to the error log relevant to the + * selected FF-A ABI. Then the error log is printed. + * + * Return: + * + * 0 on success. . Otherwise, failure + */ +static int ffa_print_error_log(u32 ffa_id, int ffa_errno) +{ + int err_idx = -ffa_errno, abi_idx = 0; + + /* Map the FF-A error code to the corresponding error log */ + + if (err_idx <= 0 || err_idx >= MAX_NUMBER_FFA_ERR) + return -EINVAL; + + if (ffa_id < FFA_FIRST_ID || ffa_id > FFA_LAST_ID) + return -EINVAL; + + abi_idx = FFA_ID_TO_ERRMAP_ID(ffa_id); + if (abi_idx < 0 || abi_idx >= FFA_ERRMAP_COUNT) + return -EINVAL; + + if (!err_msg_map[abi_idx].err_str[err_idx]) + return -EINVAL; + + log_err("%s\n", err_msg_map[abi_idx].err_str[err_idx]); + + return 0; +} + +/* FF-A ABIs implementation (U-Boot side) */ + +/** + * invoke_ffa_fn() - SMC wrapper + * @args: FF-A ABI arguments to be copied to Xn registers + * @res: FF-A ABI return data to be copied from Xn registers + * + * Calls low level SMC implementation. + * This function should be implemented by the user driver. + */ +void __weak invoke_ffa_fn(ffa_value_t args, ffa_value_t *res) +{ +} + +/** + * ffa_get_version_hdlr() - FFA_VERSION handler function + * @dev: The FF-A bus device + * + * Implement FFA_VERSION FF-A function + * to get from the secure world the FF-A framework version + * FFA_VERSION is used to discover the FF-A framework. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_get_version_hdlr(struct udevice *dev) +{ + u16 major, minor; + ffa_value_t res = {0}; + int ffa_errno; + struct ffa_priv *uc_priv; + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_VERSION), .a1 = FFA_VERSION_1_0, + }, &res); + + ffa_errno = res.a0; + if (ffa_errno < 0) { + ffa_print_error_log(FFA_VERSION, ffa_errno); + return ffa_to_std_errno(ffa_errno); + } + + major = GET_FFA_MAJOR_VERSION(res.a0); + minor = GET_FFA_MINOR_VERSION(res.a0); + + log_info("FF-A driver %d.%d\nFF-A framework %d.%d\n", + FFA_MAJOR_VERSION, FFA_MINOR_VERSION, major, minor); + + if (major == FFA_MAJOR_VERSION && minor >= FFA_MINOR_VERSION) { + log_info("FF-A versions are compatible\n"); + + if (dev) { + uc_priv = dev_get_uclass_priv(dev); + if (uc_priv) + uc_priv->fwk_version = res.a0; + } + + return 0; + } + + log_err("versions are incompatible\nExpected: %d.%d , Found: %d.%d\n", + FFA_MAJOR_VERSION, FFA_MINOR_VERSION, major, minor); + + return -EPROTONOSUPPORT; +} + +/** + * ffa_get_endpoint_id() - FFA_ID_GET handler function + * @dev: The FF-A bus device + * + * Implement FFA_ID_GET FF-A function + * to get from the secure world u-boot endpoint ID + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_get_endpoint_id(struct udevice *dev) +{ + ffa_value_t res = {0}; + int ffa_errno; + struct ffa_priv *uc_priv = dev_get_uclass_priv(dev); + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_ID_GET), + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) { + uc_priv->id = GET_SELF_ENDPOINT_ID((u32)res.a2); + log_debug("FF-A endpoint ID is %u\n", uc_priv->id); + + return 0; + } + + ffa_errno = res.a2; + + ffa_print_error_log(FFA_ID_GET, ffa_errno); + + return ffa_to_std_errno(ffa_errno); +} + +/** + * ffa_set_rxtx_buffers_pages_cnt() - set the minimum number of pages in each of the RX/TX buffers + * @dev: The FF-A bus device + * @prop_field: properties field obtained from FFA_FEATURES ABI + * + * Set the minimum number of pages in each of the RX/TX buffers in uc_priv + * + * Return: + * + * rxtx_min_pages field contains the returned number of pages + * 0 on success. Otherwise, failure + */ +static int ffa_set_rxtx_buffers_pages_cnt(struct udevice *dev, u32 prop_field) +{ + struct ffa_priv *uc_priv = dev_get_uclass_priv(dev); + + switch (prop_field) { + case RXTX_4K: + uc_priv->pair.rxtx_min_pages = 1; + break; + case RXTX_16K: + uc_priv->pair.rxtx_min_pages = 4; + break; + case RXTX_64K: + uc_priv->pair.rxtx_min_pages = 16; + break; + default: + log_err("RX/TX buffer size not supported\n"); + return -EINVAL; + } + + return 0; +} + +/** + * ffa_get_rxtx_map_features_hdlr() - FFA_FEATURES handler function with FFA_RXTX_MAP argument + * @dev: The FF-A bus device + * + * Implement FFA_FEATURES FF-A function to retrieve the FFA_RXTX_MAP features + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_get_rxtx_map_features_hdlr(struct udevice *dev) +{ + ffa_value_t res = {0}; + int ffa_errno; + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_FEATURES), + .a1 = FFA_SMC_64(FFA_RXTX_MAP), + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) + return ffa_set_rxtx_buffers_pages_cnt(dev, res.a2); + + ffa_errno = res.a2; + ffa_print_error_log(FFA_FEATURES, ffa_errno); + + return ffa_to_std_errno(ffa_errno); +} + +/** + * ffa_free_rxtx_buffers() - free the RX/TX buffers + * @dev: The FF-A bus device + * + * Free the RX/TX buffers + */ +static void ffa_free_rxtx_buffers(struct udevice *dev) +{ + struct ffa_priv *uc_priv = dev_get_uclass_priv(dev); + + log_debug("Freeing FF-A RX/TX buffers\n"); + + if (uc_priv->pair.rxbuf) { + free(uc_priv->pair.rxbuf); + uc_priv->pair.rxbuf = NULL; + } + + if (uc_priv->pair.txbuf) { + free(uc_priv->pair.txbuf); + uc_priv->pair.txbuf = NULL; + } +} + +/** + * ffa_alloc_rxtx_buffers() - allocate the RX/TX buffers + * @dev: The FF-A bus device + * + * Used by ffa_map_rxtx_buffers to allocate + * the RX/TX buffers before mapping them. The allocated memory is physically + * contiguous since memalign ends up calling malloc which allocates + * contiguous memory in u-boot. + * The size of the memory allocated is the minimum allowed. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_alloc_rxtx_buffers(struct udevice *dev) +{ + u64 bytes; + struct ffa_priv *uc_priv = dev_get_uclass_priv(dev); + + log_debug("Using %lu 4KB page(s) for FF-A RX/TX buffers size\n", + uc_priv->pair.rxtx_min_pages); + + bytes = uc_priv->pair.rxtx_min_pages * SZ_4K; + + /* + * The alignment of the RX and TX buffers must be equal + * to the larger translation granule size + * Assumption: Memory allocated with memalign is always physically contiguous + */ + + uc_priv->pair.rxbuf = memalign(bytes, bytes); + if (!uc_priv->pair.rxbuf) { + log_err("failure to allocate RX buffer\n"); + return -ENOBUFS; + } + + log_debug("FF-A RX buffer at virtual address %p\n", uc_priv->pair.rxbuf); + + uc_priv->pair.txbuf = memalign(bytes, bytes); + if (!uc_priv->pair.txbuf) { + free(uc_priv->pair.rxbuf); + uc_priv->pair.rxbuf = NULL; + log_err("failure to allocate the TX buffer\n"); + return -ENOBUFS; + } + + log_debug("FF-A TX buffer at virtual address %p\n", uc_priv->pair.txbuf); + + /* Make sure the buffers are cleared before use */ + memset(uc_priv->pair.rxbuf, 0, bytes); + memset(uc_priv->pair.txbuf, 0, bytes); + + return 0; +} + +/** + * ffa_map_rxtx_buffers_hdlr() - FFA_RXTX_MAP handler function + * @dev: The FF-A bus device + * + * Implement FFA_RXTX_MAP FF-A function to map the RX/TX buffers + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_map_rxtx_buffers_hdlr(struct udevice *dev) +{ + int ret; + ffa_value_t res = {0}; + int ffa_errno; + struct ffa_priv *uc_priv = dev_get_uclass_priv(dev); + + ret = ffa_alloc_rxtx_buffers(dev); + if (ret) + return ret; + + /* + * we need to pass the physical addresses of the RX/TX buffers + * in u-boot physical/virtual mapping is 1:1 + * no need to convert from virtual to physical + */ + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_64(FFA_RXTX_MAP), + .a1 = map_to_sysmem(uc_priv->pair.txbuf), + .a2 = map_to_sysmem(uc_priv->pair.rxbuf), + .a3 = uc_priv->pair.rxtx_min_pages, + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) { + log_debug("FF-A RX/TX buffers mapped\n"); + return 0; + } + + ffa_errno = res.a2; + ffa_print_error_log(FFA_RXTX_MAP, ffa_errno); + + ffa_free_rxtx_buffers(dev); + + return ffa_to_std_errno(ffa_errno); +} + +/** + * ffa_unmap_rxtx_buffers_hdlr() - FFA_RXTX_UNMAP handler function + * @dev: The FF-A bus device + * + * Implement FFA_RXTX_UNMAP FF-A function to unmap the RX/TX buffers + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_unmap_rxtx_buffers_hdlr(struct udevice *dev) +{ + ffa_value_t res = {0}; + int ffa_errno; + struct ffa_priv *uc_priv; + + log_debug("unmapping FF-A RX/TX buffers\n"); + + uc_priv = dev_get_uclass_priv(dev); + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_RXTX_UNMAP), + .a1 = PREP_SELF_ENDPOINT_ID(uc_priv->id), + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) { + ffa_free_rxtx_buffers(dev); + return 0; + } + + ffa_errno = res.a2; + ffa_print_error_log(FFA_RXTX_UNMAP, ffa_errno); + + return ffa_to_std_errno(ffa_errno); +} + +/** + * ffa_release_rx_buffer_hdlr() - FFA_RX_RELEASE handler function + * @dev: The FF-A bus device + * + * Invoke FFA_RX_RELEASE FF-A function to release the ownership of the RX buffer + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_release_rx_buffer_hdlr(struct udevice *dev) +{ + ffa_value_t res = {0}; + int ffa_errno; + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_RX_RELEASE), + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) + return 0; + + ffa_errno = res.a2; + ffa_print_error_log(FFA_RX_RELEASE, ffa_errno); + + return ffa_to_std_errno(ffa_errno); +} + +/** + * ffa_uuid_are_identical() - check whether two given UUIDs are identical + * @uuid1: first UUID + * @uuid2: second UUID + * + * Used by ffa_read_partitions_info to search for a UUID in the partitions descriptors table + * + * Return: + * + * 1 when UUIDs match. Otherwise, 0 + */ +static bool ffa_uuid_are_identical(const struct ffa_partition_uuid *uuid1, + const struct ffa_partition_uuid *uuid2) +{ + if (!uuid1 || !uuid2) + return 0; + + return !memcmp(uuid1, uuid2, sizeof(struct ffa_partition_uuid)); +} + +/** + * ffa_read_partitions_info() - read queried partition data + * @dev: The FF-A bus device + * @count: The number of partitions queried + * @part_uuid: Pointer to the partition(s) UUID + * + * Read the partitions information returned by the FFA_PARTITION_INFO_GET and saves it in uc_priv + * + * Return: + * + * uc_priv is updated with the partition(s) information + * 0 is returned on success. Otherwise, failure + */ +static int ffa_read_partitions_info(struct udevice *dev, u32 count, + struct ffa_partition_uuid *part_uuid) +{ + struct ffa_priv *uc_priv = dev_get_uclass_priv(dev); + + if (!count) { + log_err("no partition detected\n"); + return -ENODATA; + } + + log_debug("Reading FF-A partitions data from the RX buffer\n"); + + if (!part_uuid) { + /* Querying information of all partitions */ + u64 buf_bytes; + u64 data_bytes; + u32 desc_idx; + struct ffa_partition_info *parts_info; + + data_bytes = count * sizeof(struct ffa_partition_desc); + + buf_bytes = uc_priv->pair.rxtx_min_pages * SZ_4K; + + if (data_bytes > buf_bytes) { + log_err("partitions data size exceeds the RX buffer size:\n"); + log_err(" sizes in bytes: data %llu , RX buffer %llu\n", + data_bytes, + buf_bytes); + + return -ENOMEM; + } + + uc_priv->partitions.descs = devm_kmalloc(dev, data_bytes, __GFP_ZERO); + if (!uc_priv->partitions.descs) { + log_err("cannot allocate partitions data buffer\n"); + return -ENOMEM; + } + + parts_info = uc_priv->pair.rxbuf; + + for (desc_idx = 0 ; desc_idx < count ; desc_idx++) { + uc_priv->partitions.descs[desc_idx].info = + parts_info[desc_idx]; + + log_debug("FF-A partition ID %x : info cached\n", + uc_priv->partitions.descs[desc_idx].info.id); + } + + uc_priv->partitions.count = count; + + log_debug("%d FF-A partition(s) found and cached\n", count); + + } else { + u32 rx_desc_idx, cached_desc_idx; + struct ffa_partition_info *parts_info; + u8 desc_found; + + parts_info = uc_priv->pair.rxbuf; + + /* + * Search for the SP IDs read from the RX buffer + * in the already cached SPs. + * Update the UUID when ID found. + */ + for (rx_desc_idx = 0; rx_desc_idx < count ; rx_desc_idx++) { + desc_found = 0; + + /* Search the current ID in the cached partitions */ + for (cached_desc_idx = 0; + cached_desc_idx < uc_priv->partitions.count; + cached_desc_idx++) { + /* Save the UUID */ + if (uc_priv->partitions.descs[cached_desc_idx].info.id == + parts_info[rx_desc_idx].id) { + uc_priv->partitions.descs[cached_desc_idx].sp_uuid = + *part_uuid; + + desc_found = 1; + break; + } + } + + if (!desc_found) + return -ENODATA; + } + } + + return 0; +} + +/** + * ffa_query_partitions_info() - invoke FFA_PARTITION_INFO_GET and save partitions data + * @dev: The FF-A bus device + * @part_uuid: Pointer to the partition(s) UUID + * @pcount: Pointer to the number of partitions variable filled when querying + * + * Execute the FFA_PARTITION_INFO_GET to query the partitions data. + * Then, call ffa_read_partitions_info to save the data in uc_priv. + * + * After reading the data the RX buffer is released using ffa_release_rx_buffer + * + * Return: + * + * When part_uuid is NULL, all partitions data are retrieved from secure world + * When part_uuid is non NULL, data for partitions matching the given UUID are + * retrieved and the number of partitions is returned + * 0 is returned on success. Otherwise, failure + */ +static int ffa_query_partitions_info(struct udevice *dev, struct ffa_partition_uuid *part_uuid, + u32 *pcount) +{ + struct ffa_partition_uuid query_uuid = {0}; + ffa_value_t res = {0}; + int ffa_errno; + + /* + * If a UUID is specified. Information for one or more + * partitions in the system is queried. Otherwise, information + * for all installed partitions is queried + */ + + if (part_uuid) { + if (!pcount) + return -EINVAL; + + query_uuid = *part_uuid; + } else if (pcount) { + return -EINVAL; + } + + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_PARTITION_INFO_GET), + .a1 = query_uuid.a1, + .a2 = query_uuid.a2, + .a3 = query_uuid.a3, + .a4 = query_uuid.a4, + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) { + int ret; + + /* + * res.a2 contains the count of partition information descriptors + * populated in the RX buffer + */ + if (res.a2) { + ret = ffa_read_partitions_info(dev, (u32)res.a2, part_uuid); + if (ret) { + log_err("failed reading SP(s) data , err (%d)\n", ret); + ffa_release_rx_buffer_hdlr(dev); + return -EINVAL; + } + } + + /* Return the SP count (when querying using a UUID) */ + if (pcount) + *pcount = (u32)res.a2; + + /* + * After calling FFA_PARTITION_INFO_GET the buffer ownership + * is assigned to the consumer (u-boot). So, we need to give + * the ownership back to the SPM or hypervisor + */ + ret = ffa_release_rx_buffer_hdlr(dev); + + return ret; + } + + ffa_errno = res.a2; + ffa_print_error_log(FFA_PARTITION_INFO_GET, ffa_errno); + + return ffa_to_std_errno(ffa_errno); +} + +/** + * ffa_get_partitions_info_hdlr() - FFA_PARTITION_INFO_GET handler function + * @uuid_str: pointer to the UUID string + * @sp_count: address of the variable containing the number of partitions matching the UUID + * The variable is set by the driver + * @sp_descs: address of the descriptors of the partitions matching the UUID + * The address is set by the driver + * + * Return the number of partitions and their descriptors matching the UUID + * + * Query the secure partition data from uc_priv. + * If not found, invoke FFA_PARTITION_INFO_GET FF-A function to query the partition information + * from secure world. + * + * A client of the FF-A driver should know the UUID of the service it wants to + * access. It should use the UUID to request the FF-A driver to provide the + * partition(s) information of the service. The FF-A driver uses + * PARTITION_INFO_GET to obtain this information. This is implemented through + * ffa_get_partitions_info_hdlr() function. + * If the partition(s) matching the UUID found, the partition(s) information and the + * number are returned. + * If no partition matching the UUID is found in the cached area, a new FFA_PARTITION_INFO_GET + * call is issued. + * If not done yet, the UUID is updated in the cached area. + * This assumes that partitions data does not change in the secure world. + * Otherwise u-boot will have an outdated partition data. The benefit of caching + * the information in the FF-A driver is to accommodate discovery after + * ExitBootServices(). + * + * Return: + * + * @sp_count: the number of partitions + * @sp_descs: address of the partitions descriptors + * + * On success 0 is returned. Otherwise, failure + */ +int ffa_get_partitions_info_hdlr(struct udevice *dev, const char *uuid_str, + u32 *sp_count, struct ffa_partition_desc **sp_descs) +{ + u32 i; + struct ffa_partition_uuid part_uuid = {0}; + struct ffa_priv *uc_priv; + struct ffa_partition_desc *rx_descs; + + uc_priv = dev_get_uclass_priv(dev); + + if (!uc_priv->partitions.count || !uc_priv->partitions.descs) { + log_err("no partition installed\n"); + return -EINVAL; + } + + if (!uuid_str) { + log_err("no UUID provided\n"); + return -EINVAL; + } + + if (!sp_count) { + log_err("no count argument provided\n"); + return -EINVAL; + } + + if (!sp_descs) { + log_err("no info argument provided\n"); + return -EINVAL; + } + + if (uuid_str_to_le_bin(uuid_str, (unsigned char *)&part_uuid)) { + log_err("invalid UUID\n"); + return -EINVAL; + } + + log_debug("Searching FF-A partitions using the provided UUID\n"); + + *sp_count = 0; + *sp_descs = uc_priv->pair.rxbuf; + rx_descs = *sp_descs; + + /* Search in the cached partitions */ + for (i = 0; i < uc_priv->partitions.count; i++) + if (ffa_uuid_are_identical(&uc_priv->partitions.descs[i].sp_uuid, + &part_uuid)) { + log_debug("FF-A partition ID %x matches the provided UUID\n", + uc_priv->partitions.descs[i].info.id); + + (*sp_count)++; + *rx_descs++ = uc_priv->partitions.descs[i]; + } + + if (!(*sp_count)) { + int ret; + + log_debug("No FF-A partition found. Querying framework ...\n"); + + ret = ffa_query_partitions_info(dev, &part_uuid, sp_count); + + if (!ret) { + log_debug("Number of FF-A partition(s) matching the UUID: %d\n", *sp_count); + + if (*sp_count) + ret = ffa_get_partitions_info_hdlr(dev, uuid_str, sp_count, + sp_descs); + else + ret = -ENODATA; + } + + return ret; + } + + return 0; +} + +/** + * ffa_cache_partitions_info() - Query and saves all secure partitions data + * @dev: The FF-A bus device + * + * Invoke FFA_PARTITION_INFO_GET FF-A function to query from secure world + * all partitions information. + * + * The FFA_PARTITION_INFO_GET call is issued with nil UUID as an argument. + * All installed partitions information are returned. We cache them in uc_priv + * and we keep the UUID field empty (in FF-A 1.0 UUID is not provided by the partition descriptor) + * + * Called at the device probing level. + * ffa_cache_partitions_info uses ffa_query_partitions_info to get the data + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_cache_partitions_info(struct udevice *dev) +{ + return ffa_query_partitions_info(dev, NULL, NULL); +} + +/** + * ffa_msg_send_direct_req_hdlr() - FFA_MSG_SEND_DIRECT_{REQ,RESP} handler function + * @dev: The FF-A bus device + * @dst_part_id: destination partition ID + * @msg: pointer to the message data preallocated by the client (in/out) + * @is_smc64: select 64-bit or 32-bit FF-A ABI + * + * Implement FFA_MSG_SEND_DIRECT_{REQ,RESP} + * FF-A functions. + * + * FFA_MSG_SEND_DIRECT_REQ is used to send the data to the secure partition. + * The response from the secure partition is handled by reading the + * FFA_MSG_SEND_DIRECT_RESP arguments. + * + * The maximum size of the data that can be exchanged is 40 bytes which is + * sizeof(struct ffa_send_direct_data) as defined by the FF-A specification 1.0 + * in the section relevant to FFA_MSG_SEND_DIRECT_{REQ,RESP} + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_msg_send_direct_req_hdlr(struct udevice *dev, u16 dst_part_id, + struct ffa_send_direct_data *msg, bool is_smc64) +{ + ffa_value_t res = {0}; + int ffa_errno; + u64 req_mode, resp_mode; + struct ffa_priv *uc_priv; + + uc_priv = dev_get_uclass_priv(dev); + + /* No partition installed */ + if (!uc_priv->partitions.count || !uc_priv->partitions.descs) + return -ENODEV; + + if (is_smc64) { + req_mode = FFA_SMC_64(FFA_MSG_SEND_DIRECT_REQ); + resp_mode = FFA_SMC_64(FFA_MSG_SEND_DIRECT_RESP); + } else { + req_mode = FFA_SMC_32(FFA_MSG_SEND_DIRECT_REQ); + resp_mode = FFA_SMC_32(FFA_MSG_SEND_DIRECT_RESP); + } + + invoke_ffa_fn((ffa_value_t){ + .a0 = req_mode, + .a1 = PREP_SELF_ENDPOINT_ID(uc_priv->id) | + PREP_PART_ENDPOINT_ID(dst_part_id), + .a2 = 0, + .a3 = msg->data0, + .a4 = msg->data1, + .a5 = msg->data2, + .a6 = msg->data3, + .a7 = msg->data4, + }, &res); + + while (res.a0 == FFA_SMC_32(FFA_INTERRUPT)) + invoke_ffa_fn((ffa_value_t){ + .a0 = FFA_SMC_32(FFA_RUN), + .a1 = res.a1, + }, &res); + + if (res.a0 == FFA_SMC_32(FFA_SUCCESS)) { + /* Message sent with no response */ + return 0; + } + + if (res.a0 == resp_mode) { + /* Message sent with response extract the return data */ + msg->data0 = res.a3; + msg->data1 = res.a4; + msg->data2 = res.a5; + msg->data3 = res.a6; + msg->data4 = res.a7; + + return 0; + } + + ffa_errno = res.a2; + return ffa_to_std_errno(ffa_errno); +} + +/* FF-A driver operations (used by clients for communicating with FF-A)*/ + +/** + * ffa_partition_info_get() - FFA_PARTITION_INFO_GET driver operation + * @uuid_str: pointer to the UUID string + * @sp_count: address of the variable containing the number of partitions matching the UUID + * The variable is set by the driver + * @sp_descs: address of the descriptors of the partitions matching the UUID + * The address is set by the driver + * + * Driver operation for FFA_PARTITION_INFO_GET. + * Please see ffa_get_partitions_info_hdlr() description for more details. + * + * Return: + * + * @sp_count: the number of partitions + * @sp_descs: address of the partitions descriptors + * + * On success 0 is returned. Otherwise, failure + */ +int ffa_partition_info_get(struct udevice *dev, const char *uuid_str, + u32 *sp_count, struct ffa_partition_desc **sp_descs) +{ + struct ffa_bus_ops *ops = ffa_get_ops(dev); + + if (!ops->partition_info_get) + return -ENOSYS; + + return ops->partition_info_get(dev, uuid_str, sp_count, sp_descs); +} + +/** + * ffa_sync_send_receive() - FFA_MSG_SEND_DIRECT_{REQ,RESP} driver operation + * @dev: The FF-A bus device + * @dst_part_id: destination partition ID + * @msg: pointer to the message data preallocated by the client (in/out) + * @is_smc64: select 64-bit or 32-bit FF-A ABI + * + * Driver operation for FFA_MSG_SEND_DIRECT_{REQ,RESP}. + * Please see ffa_msg_send_direct_req_hdlr() description for more details. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_sync_send_receive(struct udevice *dev, u16 dst_part_id, + struct ffa_send_direct_data *msg, bool is_smc64) +{ + struct ffa_bus_ops *ops = ffa_get_ops(dev); + + if (!ops->sync_send_receive) + return -ENOSYS; + + return ops->sync_send_receive(dev, dst_part_id, msg, is_smc64); +} + +/** + * ffa_rxtx_unmap() - FFA_RXTX_UNMAP driver operation + * @dev: The FF-A bus device + * + * Driver operation for FFA_RXTX_UNMAP. + * Please see ffa_unmap_rxtx_buffers_hdlr() description for more details. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_rxtx_unmap(struct udevice *dev) +{ + struct ffa_bus_ops *ops = ffa_get_ops(dev); + + if (!ops->rxtx_unmap) + return -ENOSYS; + + return ops->rxtx_unmap(dev); +} + +/** + * ffa_do_probe() - probing FF-A framework + * @dev: the FF-A bus device (arm_ffa) + * + * Probing is triggered on demand by clients searching for the uclass. + * At probe level the following actions are done: + * - saving the FF-A framework version in uc_priv + * - querying from secure world the u-boot endpoint ID + * - querying from secure world the supported features of FFA_RXTX_MAP + * - mapping the RX/TX buffers + * - querying from secure world all the partitions information + * + * All data queried from secure world is saved in uc_priv. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static int ffa_do_probe(struct udevice *dev) +{ + int ret; + + ret = ffa_get_version_hdlr(dev); + if (ret) + return ret; + + ret = ffa_get_endpoint_id(dev); + if (ret) + return ret; + + ret = ffa_get_rxtx_map_features_hdlr(dev); + if (ret) + return ret; + + ret = ffa_map_rxtx_buffers_hdlr(dev); + if (ret) + return ret; + + ret = ffa_cache_partitions_info(dev); + if (ret) { + ffa_unmap_rxtx_buffers_hdlr(dev); + return ret; + } + + return 0; +} + +UCLASS_DRIVER(ffa) = { + .name = "ffa", + .id = UCLASS_FFA, + .pre_probe = ffa_do_probe, + .pre_remove = ffa_unmap_rxtx_buffers_hdlr, + .per_device_auto = sizeof(struct ffa_priv) +}; diff --git a/drivers/firmware/arm-ffa/arm-ffa.c b/drivers/firmware/arm-ffa/arm-ffa.c new file mode 100644 index 0000000000..68df75bd9e --- /dev/null +++ b/drivers/firmware/arm-ffa/arm-ffa.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com + * + * Authors: + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + */ + +#include <common.h> +#include <arm_ffa.h> +#include <arm_ffa_priv.h> +#include <dm.h> +#include <log.h> +#include <asm/global_data.h> +#include <dm/device-internal.h> +#include <linux/errno.h> + +DECLARE_GLOBAL_DATA_PTR; + +/** + * invoke_ffa_fn() - SMC wrapper + * @args: FF-A ABI arguments to be copied to Xn registers + * @res: FF-A ABI return data to be copied from Xn registers + * + * Calls low level SMC assembly function + */ +void invoke_ffa_fn(ffa_value_t args, ffa_value_t *res) +{ + arm_smccc_1_2_smc(&args, res); +} + +/** + * arm_ffa_discover() - perform FF-A discovery + * @dev: The Arm FF-A bus device (arm_ffa) + * Try to discover the FF-A framework. Discovery is performed by + * querying the FF-A framework version from secure world using the FFA_VERSION ABI. + * Return: + * + * true on success. Otherwise, false. + */ +static bool arm_ffa_discover(struct udevice *dev) +{ + int ret; + + log_info("Arm FF-A framework discovery\n"); + + ret = ffa_get_version_hdlr(dev); + if (ret) + return false; + + return true; +} + +/** + * arm_ffa_is_supported() - FF-A bus discovery callback + * @invoke_fn: legacy SMC invoke function (not used) + * + * Perform FF-A discovery by calling arm_ffa_discover(). + * Discovery is performed by querying the FF-A framework version from + * secure world using the FFA_VERSION ABI. + * + * The FF-A driver is registered as an SMCCC feature driver. So, features discovery + * callbacks are called by the PSCI driver (PSCI device is the SMCCC features + * root device). + * + * The FF-A driver supports the SMCCCv1.2 extended input/output registers. + * So, the legacy SMC invocation is not used. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +static bool arm_ffa_is_supported(void (*invoke_fn)(ulong a0, ulong a1, + ulong a2, ulong a3, + ulong a4, ulong a5, + ulong a6, ulong a7, + struct arm_smccc_res *res)) +{ + return arm_ffa_discover(NULL); +} + +/* Arm FF-A driver operations */ + +static const struct ffa_bus_ops ffa_ops = { + .partition_info_get = ffa_get_partitions_info_hdlr, + .sync_send_receive = ffa_msg_send_direct_req_hdlr, + .rxtx_unmap = ffa_unmap_rxtx_buffers_hdlr, +}; + +/* Registering the FF-A driver as an SMCCC feature driver */ + +ARM_SMCCC_FEATURE_DRIVER(arm_ffa) = { + .driver_name = FFA_DRV_NAME, + .is_supported = arm_ffa_is_supported, +}; + +/* Declaring the FF-A driver under UCLASS_FFA */ + +U_BOOT_DRIVER(arm_ffa) = { + .name = FFA_DRV_NAME, + .id = UCLASS_FFA, + .flags = DM_REMOVE_OS_PREPARE, + .ops = &ffa_ops, +}; diff --git a/drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h b/drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h new file mode 100644 index 0000000000..4338f9c9b1 --- /dev/null +++ b/drivers/firmware/arm-ffa/sandbox_arm_ffa_priv.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com + * + * Authors: + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + */ + +#ifndef __SANDBOX_ARM_FFA_PRV_H +#define __SANDBOX_ARM_FFA_PRV_H + +/* Future sandbox support private declarations */ + +#endif diff --git a/include/arm_ffa.h b/include/arm_ffa.h new file mode 100644 index 0000000000..db9b1be995 --- /dev/null +++ b/include/arm_ffa.h @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com + * + * Authors: + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + */ + +#ifndef __ARM_FFA_H +#define __ARM_FFA_H + +#include <linux/printk.h> + +/* + * This header is public. It can be used by clients to access + * data structures and definitions they need + */ + +/* + * struct ffa_partition_info - Partition information descriptor + * @id: Partition ID + * @exec_ctxt: Execution context count + * @properties: Partition properties + * + * Data structure containing information about partitions instantiated in the system + * This structure is filled with the data queried by FFA_PARTITION_INFO_GET + */ +struct ffa_partition_info { + u16 id; + u16 exec_ctxt; +/* partition supports receipt of direct requests */ +#define FFA_PARTITION_DIRECT_RECV BIT(0) +/* partition can send direct requests. */ +#define FFA_PARTITION_DIRECT_SEND BIT(1) +/* partition can send and receive indirect messages. */ +#define FFA_PARTITION_INDIRECT_MSG BIT(2) + u32 properties; +}; + +/* + * struct ffa_partition_uuid - 16 bytes UUID transmitted by FFA_PARTITION_INFO_GET + * @a1-4: 32-bit words access to the UUID data + * + */ +struct ffa_partition_uuid { + u32 a1; /* w1 */ + u32 a2; /* w2 */ + u32 a3; /* w3 */ + u32 a4; /* w4 */ +}; + +/** + * struct ffa_partition_desc - the secure partition descriptor + * @info: partition information + * @sp_uuid: the secure partition UUID + * + * Each partition has its descriptor containing the partitions information and the UUID + */ +struct ffa_partition_desc { + struct ffa_partition_info info; + struct ffa_partition_uuid sp_uuid; +}; + +/* + * struct ffa_send_direct_data - Data structure hosting the data + * used by FFA_MSG_SEND_DIRECT_{REQ,RESP} + * @data0-4: Data read/written from/to x3-x7 registers + * + * Data structure containing the data to be sent by FFA_MSG_SEND_DIRECT_REQ + * or read from FFA_MSG_SEND_DIRECT_RESP + */ + +/* For use with FFA_MSG_SEND_DIRECT_{REQ,RESP} which pass data via registers */ +struct ffa_send_direct_data { + ulong data0; /* w3/x3 */ + ulong data1; /* w4/x4 */ + ulong data2; /* w5/x5 */ + ulong data3; /* w6/x6 */ + ulong data4; /* w7/x7 */ +}; + +struct udevice; + +/** + * struct ffa_bus_ops - Operations for FF-A + * @partition_info_get: callback for the FFA_PARTITION_INFO_GET + * @sync_send_receive: callback for the FFA_MSG_SEND_DIRECT_REQ + * @rxtx_unmap: callback for the FFA_RXTX_UNMAP + * + * The data structure providing all the operations supported by the driver. + * This structure is EFI runtime resident. + */ +struct ffa_bus_ops { + int (*partition_info_get)(struct udevice *dev, const char *uuid_str, + u32 *sp_count, struct ffa_partition_desc **sp_descs); + int (*sync_send_receive)(struct udevice *dev, u16 dst_part_id, + struct ffa_send_direct_data *msg, + bool is_smc64); + int (*rxtx_unmap)(struct udevice *dev); +}; + +#define ffa_get_ops(dev) ((struct ffa_bus_ops *)(dev)->driver->ops) + +/** + * ffa_rxtx_unmap() - FFA_RXTX_UNMAP driver operation + * Please see ffa_unmap_rxtx_buffers_hdlr() description for more details. + */ +int ffa_rxtx_unmap(struct udevice *dev); + +/** + * ffa_unmap_rxtx_buffers_hdlr() - FFA_RXTX_UNMAP handler function + * @dev: The arm_ffa bus device + * + * This function implements FFA_RXTX_UNMAP FF-A function + * to unmap the RX/TX buffers + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_unmap_rxtx_buffers_hdlr(struct udevice *dev); + +/** + * ffa_sync_send_receive() - FFA_MSG_SEND_DIRECT_{REQ,RESP} driver operation + * Please see ffa_msg_send_direct_req_hdlr() description for more details. + */ +int ffa_sync_send_receive(struct udevice *dev, u16 dst_part_id, + struct ffa_send_direct_data *msg, bool is_smc64); + +/** + * ffa_msg_send_direct_req_hdlr() - FFA_MSG_SEND_DIRECT_{REQ,RESP} handler function + * @dev: The arm_ffa bus device + * @dst_part_id: destination partition ID + * @msg: pointer to the message data preallocated by the client (in/out) + * @is_smc64: select 64-bit or 32-bit FF-A ABI + * + * This function implements FFA_MSG_SEND_DIRECT_{REQ,RESP} + * FF-A functions. + * + * FFA_MSG_SEND_DIRECT_REQ is used to send the data to the secure partition. + * The response from the secure partition is handled by reading the + * FFA_MSG_SEND_DIRECT_RESP arguments. + * + * The maximum size of the data that can be exchanged is 40 bytes which is + * sizeof(struct ffa_send_direct_data) as defined by the FF-A specification 1.0 + * in the section relevant to FFA_MSG_SEND_DIRECT_{REQ,RESP} + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_msg_send_direct_req_hdlr(struct udevice *dev, u16 dst_part_id, + struct ffa_send_direct_data *msg, bool is_smc64); + +/** + * ffa_partition_info_get() - FFA_PARTITION_INFO_GET driver operation + * Please see ffa_get_partitions_info_hdlr() description for more details. + */ +int ffa_partition_info_get(struct udevice *dev, const char *uuid_str, + u32 *sp_count, struct ffa_partition_desc **sp_descs); + +/** + * ffa_get_partitions_info_hdlr() - FFA_PARTITION_INFO_GET handler function + * @uuid_str: pointer to the UUID string + * @sp_count: address of the variable containing the number of partitions matching the UUID + * The variable is set by the driver + * @sp_descs: address of the descriptors of the partitions matching the UUID + * The address is set by the driver + * + * Return the number of partitions and their descriptors matching the UUID + * + * Query the secure partition data from uc_priv. + * If not found, invoke FFA_PARTITION_INFO_GET + * FF-A function to query the partition information from secure world. + * + * A client of the FF-A driver should know the UUID of the service it wants to + * access. It should use the UUID to request the FF-A driver to provide the + * partition(s) information of the service. The FF-A driver uses + * PARTITION_INFO_GET to obtain this information. This is implemented through + * ffa_get_partitions_info_hdlr() function. + * A new FFA_PARTITION_INFO_GET call is issued (first one performed through + * ffa_cache_partitions_info) allowing to retrieve the partition(s) information. + * They are not saved (already done). We only update the UUID in the cached area. + * This assumes that partitions data does not change in the secure world. + * Otherwise u-boot will have an outdated partition data. The benefit of caching + * the information in the FF-A driver is to accommodate discovery after + * ExitBootServices(). + * + * Return: + * + * @sp_count: the number of partitions + * @sp_descs: address of the partitions descriptors + * + * On success 0 is returned. Otherwise, failure + */ +int ffa_get_partitions_info_hdlr(struct udevice *dev, const char *uuid_str, + u32 *sp_count, struct ffa_partition_desc **sp_descs); + +struct ffa_priv; + +/** + * ffa_set_smc_conduit() - Set the SMC conduit + * @dev: The FF-A bus device + * + * Selects the SMC conduit by setting the FF-A ABI invoke function. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_set_smc_conduit(struct udevice *dev); + +#endif diff --git a/include/arm_ffa_priv.h b/include/arm_ffa_priv.h new file mode 100644 index 0000000000..d564c33c64 --- /dev/null +++ b/include/arm_ffa_priv.h @@ -0,0 +1,246 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com + * + * Authors: + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com + */ + +#ifndef __ARM_FFA_PRV_H +#define __ARM_FFA_PRV_H + +#include <mapmem.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> + +/* This header is exclusively used by the FF-A Uclass and FF-A driver(s) */ + +/* Arm FF-A driver name */ +#define FFA_DRV_NAME "arm_ffa" + +/* The FF-A SMC function definitions */ + +#if CONFIG_IS_ENABLED(SANDBOX) + +/* Providing Arm SMCCC declarations to sandbox */ + +/** + * struct sandbox_smccc_1_2_regs - emulated SMC call arguments or results + * @a0-a17 argument values from registers 0 to 17 + */ +struct sandbox_smccc_1_2_regs { + ulong a0; + ulong a1; + ulong a2; + ulong a3; + ulong a4; + ulong a5; + ulong a6; + ulong a7; + ulong a8; + ulong a9; + ulong a10; + ulong a11; + ulong a12; + ulong a13; + ulong a14; + ulong a15; + ulong a16; + ulong a17; +}; + +typedef struct sandbox_smccc_1_2_regs ffa_value_t; + +#define ARM_SMCCC_FAST_CALL 1UL +#define ARM_SMCCC_OWNER_STANDARD 4 +#define ARM_SMCCC_SMC_32 0 +#define ARM_SMCCC_SMC_64 1 +#define ARM_SMCCC_TYPE_SHIFT 31 +#define ARM_SMCCC_CALL_CONV_SHIFT 30 +#define ARM_SMCCC_OWNER_MASK 0x3f +#define ARM_SMCCC_OWNER_SHIFT 24 +#define ARM_SMCCC_FUNC_MASK 0xffff + +#define ARM_SMCCC_CALL_VAL(type, calling_convention, owner, func_num) \ + (((type) << ARM_SMCCC_TYPE_SHIFT) | \ + ((calling_convention) << ARM_SMCCC_CALL_CONV_SHIFT) | \ + (((owner) & ARM_SMCCC_OWNER_MASK) << ARM_SMCCC_OWNER_SHIFT) | \ + ((func_num) & ARM_SMCCC_FUNC_MASK)) + +#else +/* CONFIG_ARM64 */ +#include <linux/arm-smccc.h> +typedef struct arm_smccc_1_2_regs ffa_value_t; +#endif + +/* Defining the function pointer type for the function executing the FF-A ABIs */ +typedef void (*invoke_ffa_fn_t)(ffa_value_t args, ffa_value_t *res); + +/* FF-A driver version definitions */ + +#define MAJOR_VERSION_MASK GENMASK(30, 16) +#define MINOR_VERSION_MASK GENMASK(15, 0) +#define GET_FFA_MAJOR_VERSION(x) \ + ((u16)(FIELD_GET(MAJOR_VERSION_MASK, (x)))) +#define GET_FFA_MINOR_VERSION(x) \ + ((u16)(FIELD_GET(MINOR_VERSION_MASK, (x)))) +#define PACK_VERSION_INFO(major, minor) \ + (FIELD_PREP(MAJOR_VERSION_MASK, (major)) | \ + FIELD_PREP(MINOR_VERSION_MASK, (minor))) + +#define FFA_MAJOR_VERSION (1) +#define FFA_MINOR_VERSION (0) +#define FFA_VERSION_1_0 \ + PACK_VERSION_INFO(FFA_MAJOR_VERSION, FFA_MINOR_VERSION) + +/* Endpoint ID mask (u-boot endpoint ID) */ + +#define GET_SELF_ENDPOINT_ID_MASK GENMASK(15, 0) +#define GET_SELF_ENDPOINT_ID(x) \ + ((u16)(FIELD_GET(GET_SELF_ENDPOINT_ID_MASK, (x)))) + +#define PREP_SELF_ENDPOINT_ID_MASK GENMASK(31, 16) +#define PREP_SELF_ENDPOINT_ID(x) \ + (FIELD_PREP(PREP_SELF_ENDPOINT_ID_MASK, (x))) + +/* Partition endpoint ID mask (partition with which u-boot communicates with) */ + +#define PREP_PART_ENDPOINT_ID_MASK GENMASK(15, 0) +#define PREP_PART_ENDPOINT_ID(x) \ + (FIELD_PREP(PREP_PART_ENDPOINT_ID_MASK, (x))) + +/* Definitions of the Arm FF-A interfaces supported by the Arm FF-A driver */ + +#define FFA_SMC(calling_convention, func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, (calling_convention), \ + ARM_SMCCC_OWNER_STANDARD, (func_num)) + +#define FFA_SMC_32(func_num) FFA_SMC(ARM_SMCCC_SMC_32, (func_num)) +#define FFA_SMC_64(func_num) FFA_SMC(ARM_SMCCC_SMC_64, (func_num)) + +enum ffa_abis { + FFA_ERROR = 0x60, + FFA_SUCCESS = 0x61, + FFA_INTERRUPT = 0x62, + FFA_VERSION = 0x63, + FFA_FEATURES = 0x64, + FFA_RX_RELEASE = 0x65, + FFA_RXTX_MAP = 0x66, + FFA_RXTX_UNMAP = 0x67, + FFA_PARTITION_INFO_GET = 0x68, + FFA_ID_GET = 0x69, + FFA_RUN = 0x6d, + FFA_MSG_SEND_DIRECT_REQ = 0x6f, + FFA_MSG_SEND_DIRECT_RESP = 0x70, + + /* To be updated when adding new FFA IDs */ + FFA_FIRST_ID = FFA_ERROR, /* Lowest number ID */ + FFA_LAST_ID = FFA_MSG_SEND_DIRECT_RESP, /* Highest number ID */ +}; + +enum ffa_abi_errcode { + NOT_SUPPORTED = 1, + INVALID_PARAMETERS, + NO_MEMORY, + BUSY, + INTERRUPTED, + DENIED, + RETRY, + ABORTED, + MAX_NUMBER_FFA_ERR +}; + +extern int ffa_to_std_errmap[MAX_NUMBER_FFA_ERR]; + +/* Container structure and helper macros to map between an FF-A error and relevant error log */ +struct ffa_abi_errmap { + char *err_str[MAX_NUMBER_FFA_ERR]; +}; + +#define FFA_ERRMAP_COUNT (FFA_LAST_ID - FFA_FIRST_ID + 1) +#define FFA_ID_TO_ERRMAP_ID(ffa_id) ((ffa_id) - FFA_FIRST_ID) + +/** + * enum ffa_rxtx_buf_sizes - minimum sizes supported + * for the RX/TX buffers + */ +enum ffa_rxtx_buf_sizes { + RXTX_4K, + RXTX_64K, + RXTX_16K +}; + +/** + * struct ffa_rxtxpair - Hosts the RX/TX buffers virtual addresses + * @rxbuf: virtual address of the RX buffer + * @txbuf: virtual address of the TX buffer + * @rxtx_min_pages: RX/TX buffers minimum size in pages + * + * Hosts the virtual addresses of the mapped RX/TX buffers + * These addresses are used by the FF-A functions that use the RX/TX buffers + */ +struct ffa_rxtxpair { + void *rxbuf; /* Virtual address returned by memalign */ + void *txbuf; /* Virtual address returned by memalign */ + size_t rxtx_min_pages; /* Minimum number of pages in each of the RX/TX buffers */ +}; + +struct ffa_partition_desc; + +/** + * struct ffa_partitions - descriptors for all secure partitions + * @count: The number of partitions descriptors + * @descs The partitions descriptors table + * + * Contains the partitions descriptors table + */ +struct ffa_partitions { + u32 count; + struct ffa_partition_desc *descs; /* Virtual address */ +}; + +/** + * struct ffa_priv - the driver private data structure + * + * @fwk_version: FF-A framework version + * @emul: FF-A sandbox emulator + * @id: u-boot endpoint ID + * @partitions: The partitions descriptors structure + * @pair: The RX/TX buffers pair + * + * The device private data structure containing all the + * data read from secure world. + */ +struct ffa_priv { + u32 fwk_version; + struct udevice *emul; + u16 id; + struct ffa_partitions partitions; + struct ffa_rxtxpair pair; +}; + +/** + * ffa_get_version_hdlr() - FFA_VERSION handler function + * @dev: The FF-A bus device + * + * Implement FFA_VERSION FF-A function + * to get from the secure world the FF-A framework version + * FFA_VERSION is used to discover the FF-A framework. + * + * Return: + * + * 0 on success. Otherwise, failure + */ +int ffa_get_version_hdlr(struct udevice *dev); + +/** + * invoke_ffa_fn() - SMC wrapper + * @args: FF-A ABI arguments to be copied to Xn registers + * @res: FF-A ABI return data to be copied from Xn registers + * + * Calls low level SMC implementation. + * This function should be implemented by the user driver. + */ +void invoke_ffa_fn(ffa_value_t args, ffa_value_t *res); + +#endif diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 307ad6931c..3c6af2e3d2 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -4,6 +4,11 @@ * * (C) Copyright 2012 * Pavel Herrmann morpheus.ibis@gmail.com + * + * Copyright 2022-2023 Arm Limited and/or its affiliates open-source-office@arm.com + * + * Authors: + * Abdellatif El Khlifi abdellatif.elkhlifi@arm.com */
#ifndef _DM_UCLASS_ID_H @@ -57,6 +62,7 @@ enum uclass_id { UCLASS_ETH, /* Ethernet device */ UCLASS_ETH_PHY, /* Ethernet PHY device */ UCLASS_EXTCON, /* External Connector Class */ + UCLASS_FFA, /* Arm Firmware Framework for Armv8-A */ UCLASS_FIRMWARE, /* Firmware */ UCLASS_FPGA, /* FPGA device */ UCLASS_FUZZING_ENGINE, /* Fuzzing engine */