T4240RDB supports booting from 2 nor banks(default and altbank). The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware.
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com --- board/freescale/t4rdb/t4240rdb.c | 19 +++++++++++++++++++ board/freescale/t4rdb/t4rdb.h | 3 +++ 2 files changed, 22 insertions(+)
diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index 6ab35ca918..20ce7523e5 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -151,3 +151,22 @@ void board_detail(void) break; } } + +ulong *cs4340_get_fw_addr(void) +{ + ulong cortina_fw_addr = CONFIG_CORTINA_FW_ADDR; + +#ifdef CONFIG_SYS_CORTINA_FW_IN_NOR + u8 sw; + + sw = CPLD_READ(vbank); + sw = sw & CPLD_BANK_SEL_MASK; + + if (sw == 0) + cortina_fw_addr = CORTINA_FW_ADDR_IFCNOR; + else if (sw == 4) + cortina_fw_addr = CORTINA_FW_ADDR_IFCNOR_ALTBANK; +#endif + + return (ulong *)cortina_fw_addr; +} diff --git a/board/freescale/t4rdb/t4rdb.h b/board/freescale/t4rdb/t4rdb.h index 3f1fa7bbd2..06779f552f 100644 --- a/board/freescale/t4rdb/t4rdb.h +++ b/board/freescale/t4rdb/t4rdb.h @@ -11,6 +11,9 @@ #define CONFIG_SYS_NUM_FM1_DTSEC 4 #define CONFIG_SYS_NUM_FM2_DTSEC 4
+#define CORTINA_FW_ADDR_IFCNOR 0xefe00000 +#define CORTINA_FW_ADDR_IFCNOR_ALTBANK 0xebf00000 + void fdt_fixup_board_enet(void *blob); void pci_of_setup(void *blob, struct bd_info *bd);