Re: [PATCH u-boot-marvell v2 6/6] arm: a37xx: pci: Update private structure documentation

On 26.09.21 00:54, Marek Behún wrote:

From: Marek Behún marek.behun@nic.cz

There were several changes for this structure but the documentation was not changed at the time. Fix this.

Signed-off-by: Marek Behún marek.behun@nic.cz

Reviewed-by: Stefan Roese sr@denx.de

Thanks, Stefan

---

drivers/pci/pci-aardvark.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c index b4f350ca2c..414872ed35 100644 --- a/drivers/pci/pci-aardvark.c +++ b/drivers/pci/pci-aardvark.c @@ -186,14 +186,15 @@ /**

• struct pcie_advk - Advk PCIe controller state

• • @reg_base: The base address of the register space.
• • @first_busno: This driver supports multiple PCIe controllers.

• •           first_busno stores the bus number of the PCIe root-port
    

• •           number which may vary depending on the PCIe setup
    

• •           (PEX switches etc).
    

• • @sec_busno: sec_busno stores the bus number for the device behind

• •           the PCIe root-port
    

• • @device: The pointer to PCI uclass device.

• • @base: The base address of the register space.
• • @first_busno: Bus number of the PCIe root-port.

• •           This may vary depending on the PCIe setup.
    

• • @sec_busno: Bus number for the device behind the PCIe root-port.
• • @dev: The pointer to PCI uclass device.
• • @reset_gpio: GPIO descriptor for PERST.
• • @cfgcache: Buffer for emulation of PCIe Root Port's PCI Bridge registers

• •           that are not available on Aardvark.
    

• • @cfgcrssve: For CRSSVE emulation.
  */ struct pcie_advk { void *base;

Viele Grüße, Stefan