From: Hou Zhiqiang Zhiqiang.Hou@nxp.com
P1010RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII PHY AR8033 eTSEC2: Connected to SGMII PHY AR8033 eTSEC3: Connected to SGMII PHY AR8033
Signed-off-by: Hou Zhiqiang Zhiqiang.Hou@nxp.com --- V6: - No change.
arch/powerpc/dts/p1010rdb-pa.dts | 1 + arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + arch/powerpc/dts/p1010rdb.dtsi | 50 ++++++++++++++++++++++++++++ arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++++++++ 4 files changed, 77 insertions(+)
diff --git a/arch/powerpc/dts/p1010rdb-pa.dts b/arch/powerpc/dts/p1010rdb-pa.dts index c66c4923ac..360d254d91 100644 --- a/arch/powerpc/dts/p1010rdb-pa.dts +++ b/arch/powerpc/dts/p1010rdb-pa.dts @@ -15,3 +15,4 @@ };
/include/ "p1010si-post.dtsi" +/include/ "p1010rdb.dtsi" diff --git a/arch/powerpc/dts/p1010rdb-pa_36b.dts b/arch/powerpc/dts/p1010rdb-pa_36b.dts index b943de7cbb..062086a8c0 100644 --- a/arch/powerpc/dts/p1010rdb-pa_36b.dts +++ b/arch/powerpc/dts/p1010rdb-pa_36b.dts @@ -15,3 +15,4 @@ };
/include/ "p1010si-post.dtsi" +/include/ "p1010rdb.dtsi" diff --git a/arch/powerpc/dts/p1010rdb.dtsi b/arch/powerpc/dts/p1010rdb.dtsi index 4f58ee2446..5964270878 100644 --- a/arch/powerpc/dts/p1010rdb.dtsi +++ b/arch/powerpc/dts/p1010rdb.dtsi @@ -5,6 +5,56 @@ * Copyright 2020 NXP */ &soc { + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + tbi-phy@3 { + device_type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + i2c@3000 { rtc@68 { compatible = "pericom,pt7c4338"; diff --git a/arch/powerpc/dts/p1010si-post.dtsi b/arch/powerpc/dts/p1010si-post.dtsi index 0289441381..f825208056 100644 --- a/arch/powerpc/dts/p1010si-post.dtsi +++ b/arch/powerpc/dts/p1010si-post.dtsi @@ -25,6 +25,31 @@ }; /include/ "pq3-i2c-0.dtsi" /include/ "pq3-i2c-1.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: ethernet@b2000 { + queue-group@b2000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + + }; };
/* controller at 0x9000 */