On Wed, Mar 2, 2011 at 6:48 PM, Robert Nelson robertcnelson@gmail.com wrote:
On Wed, Mar 2, 2011 at 5:41 PM, Alexander Holler holler@ahsoftware.de wrote:
Hello Jason,
Am 02.03.2011 21:26, schrieb Jason Kridner:
For backwards compatibility the use of boot.scr is still supported.
Sorry, but I think that line in the description should get removed too.
I'll submit a v4.
So, just a thought.. Are you guys planning to push this same boot method to all the other "omap" devices that just finally got boot.scr boot support by default in u-boot? It also seems's like it'll end up be the FAQ of the month for the beagleboard group.. ;)
Indeed it is likely to be FAQ of the month, especially if it lands in the next software update that gets shipped with the board. It is a case, however, in which I like the answer--no more need to run mkimage. The conversion process of a boot.scr script (commands) to a uEnv.txt file (variable setting) won't be exactly trivial, so that has me a tiny bit concerned. Still, most cases will be solved by a *much* simpler uEnv.txt script and an overall simpler process.
I still see a need to use the USER button to go into some sort of fall-back state to ignore this file and boot some sort of recovery image. Since that code isn't upstream yet, there is still going to be some delta between upstream and what ships on the board--unless I can somehow figure out an easy way to get a command added for the generic gpio framework.
Regards,
-- Robert Nelson http://www.rcn-ee.com/