Hi Gabriel,
On Thu, Feb 26, 2015 at 12:27 AM, Gabriel Huau contact@huau-gabriel.fr wrote:
Hi Bin,
On 02/24/2015 11:52 PM, Bin Meng wrote:
Hi Gabriel,
On Mon, Feb 16, 2015 at 5:55 AM, Gabriel Huau contact@huau-gabriel.fr wrote:
Configure the pinctrl as it required to make some IO controllers working (USB/UART/I2C/...). The idea would be in the next version to modify the pch GPIO driver and configure these pins through the device tree.
These modifications are ported from the coreboot project.
Signed-off-by: Gabriel Huau contact@huau-gabriel.fr
arch/x86/cpu/baytrail/Makefile | 1 + arch/x86/cpu/baytrail/gpio.c | 206 +++++++++++++++ arch/x86/include/asm/arch-baytrail/gpio.h | 364 ++++++++++++++++++++++++++ arch/x86/include/asm/arch-baytrail/iomap.h | 73 ++++++ arch/x86/include/asm/arch-baytrail/irq.h | 119 +++++++++ arch/x86/include/asm/arch-baytrail/irqroute.h | 67 +++++ arch/x86/include/asm/arch-baytrail/pci_devs.h | 144 ++++++++++ arch/x86/include/asm/arch-baytrail/pmc.h | 253 ++++++++++++++++++ board/intel/minnowmax/minnowmax.c | 212 +++++++++++++++ include/configs/minnowmax.h | 11 + 10 files changed, 1450 insertions(+) create mode 100644 arch/x86/cpu/baytrail/gpio.c create mode 100644 arch/x86/include/asm/arch-baytrail/iomap.h create mode 100644 arch/x86/include/asm/arch-baytrail/irq.h create mode 100644 arch/x86/include/asm/arch-baytrail/irqroute.h create mode 100644 arch/x86/include/asm/arch-baytrail/pci_devs.h create mode 100644 arch/x86/include/asm/arch-baytrail/pmc.h
[snip]
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index 823e051..738c6fa 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -69,4 +69,15 @@ /* Avoid a warning in the Realtek Ethernet driver */ #define CONFIG_SYS_CACHELINE_SIZE 16
+/*
- Baytrail has 3 GPIOs bank over PCI, there is no
- driver at the moment so let's disable the command
- and the default x86 driver to avoid any collision
- with the GPIO mapping code.
- @TODO: adding a baytrail-gpio driver and configure
- the muxing through the device tree
- */
+#undef CONFIG_INTEL_ICH6_GPIO +#undef CONFIG_CMD_GPIO
Why undef these two? The BayTrail SoC does support GPIO banks in the legacy bridge.
I might misunderstood the GPIO subsystem but I thought there was 2 banks available through the PCU iLB GPIO controller which contains the SCORE and SSUS (102 / 44 pins). The intel_ich6_gpio has a limitation of 32 GPIOs per bank and I thought it was just a different controller from the Baytrail, but if I can use it to control all the GPIOs + doing the IO mapping, I'll be glad to do it!
I checked the BayTrail datasheet. Its GPIO is in the iLB (legacy bridge), which is the same as other IA chipset (Ivybridge, TunnelCreek, Quark). It has 4 banks in core domain and 2 banks in sus domain. So 6 banks in total. You need define 6 gpio nodes in the minnowmax board dts file. You should be able to use the existing gpio driver to configure.
#endif /* __CONFIG_H */
Regards, Bin