On 7/13/22 10:27, Andre Przywara wrote:
When using the USB OTG FEL mode on the Allwinner H616, the BootROM stores some data at the end of SRAM C. This is also the location where we place the initial SPL stack, so it will overwrite this data. We still need the BROM code after running the SPL, so should leave that area alone. Interestingly this does not seem to have an adverse effect, I guess on the "way out" (when we return to FEL after the SPL has run), this data is not needed by the BROM, for just the trailing end of the USB operation. However this is still wrong, and we should not clobber BROM data.
Lower the SPL stack address to be situated right below the swap buffers we use in sunxi-fel: that should be out of the way of everyone else.
If we are going to limit SPL size based on these buffers, we should ensure they are as close to the end of SRAM as possible.
Signed-off-by: Andre Przywara andre.przywara@arm.com
include/configs/sunxi-common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Samuel Holland samuel@sholland.org Tested-by: Samuel Holland samuel@sholland.org