From: Luka Kovacic luka.kovacic@sartura.hr
The mac command is implemented to enable parsing Marvell hw_info formatted environments. This format is often used on Marvell Armada devices to store parameters like the board serial number, factory MAC addresses and some other information. These parameters are usually written to the flash in the factory.
Currently the mac command supports reading/writing parameters and dumping the current hw_info parameters. EEPROM config pattern and checksum aren't supported.
This functionality has been tested on the GST ESPRESSOBin-Ultra board successfully, both reading the stock U-Boot parameters in mainline U-Boot and reading the parameters written by this command in the stock U-Boot.
Support for this command is added for Marvell Armada A37XX and 7K/8K devices.
Usage example: => mac read => saveenv
Signed-off-by: Luka Kovacic luka.kovacic@sartura.hr Cc: Luka Perkov luka.perkov@sartura.hr Cc: Robert Marko robert.marko@sartura.hr --- Changes in v2: * Use DTS to find the hw_info partition offset instead of using KConfig --- arch/arm/mach-mvebu/Kconfig | 1 + board/Marvell/common/Kconfig | 20 ++ board/Marvell/common/Makefile | 5 + board/Marvell/common/mac.c | 418 ++++++++++++++++++++++++++++ include/configs/mvebu_armada-37xx.h | 7 + include/configs/mvebu_armada-8k.h | 7 + lib/hashtable.c | 2 +- 7 files changed, 459 insertions(+), 1 deletion(-) create mode 100644 board/Marvell/common/Kconfig create mode 100644 board/Marvell/common/Makefile create mode 100644 board/Marvell/common/mac.c
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index d23cc0c760f..39a91dd41c9 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -339,6 +339,7 @@ config SECURED_MODE_CSK_INDEX default 0 depends on SECURED_MODE_IMAGE
+source "board/Marvell/common/Kconfig" source "board/solidrun/clearfog/Kconfig" source "board/kobol/helios4/Kconfig"
diff --git a/board/Marvell/common/Kconfig b/board/Marvell/common/Kconfig new file mode 100644 index 00000000000..9887e25fb1f --- /dev/null +++ b/board/Marvell/common/Kconfig @@ -0,0 +1,20 @@ +menu "Marvell Armada common configuration" +depends on TARGET_MVEBU_ARMADA_37XX || TARGET_MVEBU_ARMADA_8K + +config MVEBU_MAC_HW_INFO + bool "Marvell hw_info (mac) support" + depends on SPI_FLASH && ENV_IS_IN_SPI_FLASH && ARCH_MVEBU + default n + help + Enable loading of the Marvell hw_info parameters from the + SPI flash hw_info area. Parameters (usually the board serial + number and MAC addresses) are then imported into the + existing U-Boot environment. + Implementation of this command is compatible with the + original Marvell U-Boot command. Reading and writing is + supported. + EEPROM config pattern and checksum aren't supported. + After enabled, these parameters are managed from the common + U-Boot mac command. + +endmenu diff --git a/board/Marvell/common/Makefile b/board/Marvell/common/Makefile new file mode 100644 index 00000000000..072c3e49de7 --- /dev/null +++ b/board/Marvell/common/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (c) 2021 Sartura Ltd. + +obj-$(CONFIG_ID_EEPROM) += mac.o diff --git a/board/Marvell/common/mac.c b/board/Marvell/common/mac.c new file mode 100644 index 00000000000..590c44c882e --- /dev/null +++ b/board/Marvell/common/mac.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Marvell hw_info (mac) command implementation + * Helper command for interfacing with the Marvell hw_info parameters + * + * Copyright (c) 2021 Sartura Ltd. + * Copyright (c) 2018 Marvell International Ltd. + * + * Author: Luka Kovacic luka.kovacic@sartura.hr + */ + +#include <command.h> +#include <common.h> +#include <env.h> +#include <env_internal.h> +#include <spi.h> +#include <spi_flash.h> + +#define HW_INFO_MAX_ENV_SIZE 0x1F0 +#define HW_INFO_ENV_OFFSET 0xA +#define HW_INFO_ENV_SEP 0x20 + +#define HW_INFO_MAX_NAME_LEN 32 + +#define HW_INFO_MERGED_VARIABLE "read_board_hw_info" + +static char hw_info_allowed_parameters[][HW_INFO_MAX_NAME_LEN] = { + "pcb_slm", + "pcb_rev", + "eco_rev", + "pcb_sn", + "ethaddr", + "eth1addr", + "eth2addr", + "eth3addr", + "eth4addr", + "eth5addr", + "eth6addr", + "eth7addr", + "eth8addr", + "eth9addr", +}; + +static int hw_info_allowed_param_count = (sizeof(hw_info_allowed_parameters) / + sizeof(hw_info_allowed_parameters[0])); + +static int hw_info_check_parameter(char *name) +{ + int idx; + + for (idx = 0; idx < hw_info_allowed_param_count; idx++) { + if (strcmp(name, hw_info_allowed_parameters[idx]) == 0) + return 0; + } + + return -EINVAL; +} + +/** + * read_spi_flash_offset() - Read data from the SPI flash + * @buf: Buffer to write in + * @offset: Offset from the flash start + * + * Read SPI flash data into the buffer from offset to HW_INFO_MAX_ENV_SIZE. + */ +static int read_spi_flash_offset(char *buf, int offset) +{ + struct spi_flash *flash; + int ret; + + flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, + CONFIG_SF_DEFAULT_MODE); + + if (!flash) { + printf("Error - unable to probe SPI flash.\n"); + return -EIO; + } + + ret = spi_flash_read(flash, offset, HW_INFO_MAX_ENV_SIZE, buf); + if (ret) { + printf("Error - unable to read hw_info environment from SPI flash.\n"); + return ret; + } + + return ret; +} + +/** + * write_spi_flash_offset() - Write a buffer to SPI flash + * @buf: Buffer to write to SPI flash + * @offset: Offset from the flash start + * @size: Size of the buffer content + * + * This function probes the SPI flash and updates the specified flash location + * with new data from the buffer. + */ +static int write_spi_flash_offset(char *buf, fdt_addr_t flash_offset, int env_offset, ssize_t size) +{ + ssize_t safe_size, erase_size; + struct spi_flash *flash; + int ret; + + flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, + CONFIG_SF_DEFAULT_MODE); + + if (!flash) { + printf("Error - unable to probe SPI flash.\n"); + return -EIO; + } + + safe_size = size > HW_INFO_MAX_ENV_SIZE ? HW_INFO_MAX_ENV_SIZE : size; + erase_size = safe_size + + (flash->erase_size - safe_size % flash->erase_size); + ret = spi_flash_erase(flash, flash_offset, erase_size); + if (ret) { + printf("Error - unable to erase the hw_info area on SPI flash.\n"); + return ret; + } + ret = spi_flash_write(flash, flash_offset + env_offset, safe_size, buf); + if (ret) { + printf("Error - unable to write hw_info parameters to SPI flash.\n"); + return ret; + } + + return ret; +} + +/** + * cmd_hw_info_dump() - Dump the hw_info parameters + * + * This function prints all Marvell hw_info parameters, which are stored in + * the SPI flash. + */ +static int cmd_hw_info_dump(fdt_addr_t flash_offset) +{ + char buffer[HW_INFO_MAX_ENV_SIZE]; + struct hsearch_data htab; + char *res = NULL; + ssize_t len; + int ret = 0; + + ret = read_spi_flash_offset(buffer, flash_offset + + HW_INFO_ENV_OFFSET); + if (ret) + goto err; + memset(&htab, 0, sizeof(htab)); + if (!hcreate_r(HW_INFO_MAX_ENV_SIZE, &htab)) { + ret = -ENOMEM; + goto err; + } + if (!himport_r(&htab, buffer, HW_INFO_MAX_ENV_SIZE, + HW_INFO_ENV_SEP, H_NOCLEAR, 0, 0, NULL)) { + ret = -EFAULT; + goto err_htab; + } + + len = hexport_r(&htab, '\n', H_HIDE_DOT, &res, 0, 0, NULL); + if (len > 0) { + printf("Parameters (hw_info):\n"); + puts(res); + free(res); + ret = 0; + goto ret_htab; + } +ret_htab: + hdestroy_r(&htab); + return ret; +err_htab: + hdestroy_r(&htab); +err: + printf("## Error: cannot store hw_info parameters to SPI flash\n"); + return ret; +} + +/** + * cmd_hw_info_read() - Import the hw_info parameters into U-Boot env + * @print_env: Print U-Boot environment after new parameters are imported + * + * This function reads the Marvell hw_info parameters from SPI flash and + * imports them into the U-Boot env. + */ +static int cmd_hw_info_read(fdt_addr_t flash_offset, bool print_env) +{ + char buffer[HW_INFO_MAX_ENV_SIZE]; + char *res = NULL; + ssize_t len; + int ret = 0; + + ret = read_spi_flash_offset(buffer, flash_offset + + HW_INFO_ENV_OFFSET); + if (ret) + goto err; + if (!himport_r(&env_htab, buffer, HW_INFO_MAX_ENV_SIZE, + HW_INFO_ENV_SEP, H_NOCLEAR, 0, 0, NULL)) { + ret = -EFAULT; + goto err; + } + + printf("Successfully imported the Marvell hw_info parameters.\n"); + if (!print_env) + return 0; + + len = hexport_r(&env_htab, '\n', H_HIDE_DOT, &res, 0, 0, NULL); + if (len > 0) { + printf("Updated environment:\n"); + puts(res); + free(res); + return 0; + } +err: + printf("## Error: cannot import hw_info parameters\n"); + return ret; +} + +/** + * cmd_hw_info_save() - Save a parameter from U-Boot env to hw_info parameters + * @name: Name of the U-Boot env parameter to save + * + * This function finds the specified parameter by name in the U-Boot env + * and then updates the Marvell hw_info parameters with the new value. + */ +static int cmd_hw_info_save(fdt_addr_t flash_offset, char *name) +{ + char buffer[HW_INFO_MAX_ENV_SIZE]; + struct env_entry e, *ep, *rv; + struct hsearch_data htab; + char *res = NULL; + ssize_t len; + int ret = 0; + + ret = hw_info_check_parameter(name); + if (ret) { + printf("Invalid parameter %s, stopping.\n", name); + goto err; + } + + ret = read_spi_flash_offset(buffer, flash_offset + + HW_INFO_ENV_OFFSET); + if (ret) + goto err; + memset(&htab, 0, sizeof(htab)); + if (!hcreate_r(HW_INFO_MAX_ENV_SIZE, &htab)) { + ret = -ENOMEM; + goto err; + } + if (!himport_r(&htab, buffer, HW_INFO_MAX_ENV_SIZE, + HW_INFO_ENV_SEP, H_NOCLEAR, 0, 0, NULL)) { + ret = -EFAULT; + goto err_htab; + } + + e.key = name; + e.data = NULL; + if (!hsearch_r(e, ENV_FIND, &ep, &env_htab, H_HIDE_DOT)) { + ret = -ENOENT; + goto err_htab; + } + if (!ep) { + ret = -ENOENT; + goto err_htab; + } + + printf("Storing %s=%s to hw_info...\n", ep->key, ep->data); + + e.key = ep->key; + e.data = ep->data; + if (!hsearch_r(e, ENV_ENTER, &rv, &htab, H_HIDE_DOT)) { + ret = -EINVAL; + goto err_htab; + } + if (!rv) { + ret = -EINVAL; + goto err_htab; + } + len = hexport_r(&htab, HW_INFO_ENV_SEP, H_MATCH_KEY | H_MATCH_IDENT, + &res, 0, 0, NULL); + if (len <= 0) { + free(res); + goto ret_htab; + } + ret = write_spi_flash_offset(res, flash_offset, + HW_INFO_ENV_OFFSET, len); + free(res); + if (ret) + goto err_htab; + + printf("Successfully stored the Marvell hw_info parameters.\n"); + return 0; +ret_htab: + hdestroy_r(&htab); + return ret; +err_htab: + hdestroy_r(&htab); +err: + printf("## Error: cannot store hw_info parameters to SPI flash\n"); + return ret; +} + +/** + * mac_read_from_eeprom() - Read the parameters from SPI flash. + * + * This function reads the content of the Marvell hw_info parameters from the + * SPI flash and imports them into the U-Boot environment. + * This includes MAC addresses and board serial numbers. + * + * The import is performed only once. + * + * This function is a part of the U-Boot mac command and must be executed + * after SPI flash initialization. + */ +int mac_read_from_eeprom(void) +{ + fdt_addr_t flash_offset, size; + ofnode hw_info_node; + + hw_info_node = ofnode_by_compatible(ofnode_null(), "marvell,hw-info"); + if (!ofnode_valid(hw_info_node)) { + printf("Missing hw-info DT node!\n"); + return -ENODEV; + } + + flash_offset = ofnode_get_addr_size_index_notrans(hw_info_node, 0, &size); + if (flash_offset == FDT_ADDR_T_NONE || !size) { + printf("Missing hw-info offset or size!\n"); + return -EINVAL; + } + + if (env_get_ulong(HW_INFO_MERGED_VARIABLE, 10, 0) == 0) { + if (env_set_ulong(HW_INFO_MERGED_VARIABLE, 1)) + return -ENOENT; + return cmd_hw_info_read(flash_offset, false); + } + return 0; +} + +/** + * print_platform_help() - Print the platform specific help + * + * Extend the existing U-Boot mac command description by also printing + * platform specific help text. + */ +static void print_platform_help(void) +{ + printf("\nNote: arguments mac [id|num|errata|date|ports|port_number]\n" + "are unavailable on Marvell Armada A37xx platforms.\n" + "Use mac [read|save {parameter}] instead.\n" + "Available parameters:\n" + "pcb_slm\tPCB SLM number\n" + "pcb_rev\tPCB revision number\n" + "eco_rev\tECO revision number\n" + "pcb_sn\tPCB SN\n" + "ethaddr\tfirst MAC address\n" + "eth[1-9]addr\tsecond-ninth MAC address\n"); +} + +/** + * do_mac() - Standard U-Boot mac command implementation + * @cmdtp: U-Boot command table + * @flag: Execution flags + * @argc: Count of arguments + * @argv: Arguments + * + * This function implements the standard U-Boot mac command in a mostly + * compatible way. + * To conform to the general command structure as much as possible, the + * command description from cmd/mac.c is followed. + * Where not possible, convenient or sensible additional comments for the user + * are added. + */ +int do_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +{ + const char *cmd = argv[1]; + fdt_addr_t flash_offset, size; + ofnode hw_info_node; + int ret = 0; + + hw_info_node = ofnode_by_compatible(ofnode_null(), "marvell,hw-info"); + if (!ofnode_valid(hw_info_node)) { + printf("Missing hw-info DT node!\n"); + return -ENODEV; + } + + flash_offset = ofnode_get_addr_size_index_notrans(hw_info_node, 0, &size); + if (flash_offset == FDT_ADDR_T_NONE || !size) { + printf("Missing hw-info offset or size!\n"); + return -EINVAL; + } + + if (argc == 1) { + ret = cmd_hw_info_dump(flash_offset); + if (ret) + return -EINVAL; + return CMD_RET_SUCCESS; + } + + if (!strcmp(cmd, "read")) { + if (cmd_hw_info_read(flash_offset, true)) + return -EINVAL; + } else if (!strcmp(cmd, "save")) { + if (argc != 3) { + printf("Please pass an additional argument to specify, " + "which env parameter to save.\n"); + return -EINVAL; + } + if (cmd_hw_info_save(flash_offset, argv[2])) + return -EINVAL; + } else { + ret = cmd_usage(cmdtp); + print_platform_help(); + return ret; + } + + return CMD_RET_SUCCESS; +} diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index e7f7e772fc7..62e9a8b684f 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -40,6 +40,13 @@ */ #define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */
+/* + * Platform identification (Marvell hw_info parameters) + */ +#ifdef CONFIG_MVEBU_MAC_HW_INFO +#define CONFIG_ID_EEPROM /* U-Boot mac command */ +#endif + /* * Ethernet Driver configuration */ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 886f44c9030..34e757cb177 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -29,6 +29,13 @@ /* End of 16M scrubbed by training in bootrom */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
+/* + * Platform identification (Marvell hw_info parameters) + */ +#ifdef CONFIG_MVEBU_MAC_HW_INFO +#define CONFIG_ID_EEPROM /* U-Boot mac command */ +#endif + /* When runtime detection fails this is the default */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/lib/hashtable.c b/lib/hashtable.c index ff5ff726394..06322e3304a 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -794,7 +794,7 @@ static int drop_var_from_set(const char *name, int nvars, char * vars[]) * multi-line values. * * In theory, arbitrary separator characters can be used, but only - * '\0' and '\n' have really been tested. + * '\0', '\n' and 0x20 have been tested. */
int himport_r(struct hsearch_data *htab,