Dear Bo Shen,
Bo Shen voice.shen@atmel.com writes:
Enable SPL support for at91sam9x5ek board. Now, it supports boot up from NAND flash and SPI flash.
Signed-off-by: Bo Shen voice.shen@atmel.com
Changes in v2:
- Remove the meaningless prefix "+S:" in configuration file.
arch/arm/mach-at91/Kconfig | 1 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/include/mach/at91_pmc.h | 6 ++- arch/arm/mach-at91/include/mach/at91sam9x5.h | 10 ++++ arch/arm/mach-at91/mpddrc.c | 3 +- arch/arm/mach-at91/spl.c | 2 +- arch/arm/mach-at91/spl_at91.c | 5 ++ board/atmel/at91sam9x5ek/at91sam9x5ek.c | 74 ++++++++++++++++++++++++++++ configs/at91sam9x5ek_nandflash_defconfig | 1 + configs/at91sam9x5ek_spiflash_defconfig | 1 + include/configs/at91sam9x5ek.h | 57 +++++++++++++++++++++ 11 files changed, 157 insertions(+), 4 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards, Andreas Bießmann