Hi,
I am using a MPC8572 costume board. I am using U-boot as the boot loader. I accidently made the bootdelay to 0 and I have the valid kernel , rootfs in flash. The bootargs is "root=/dev/ram rw console=ttyS0,115200".
So I am not able to stop booting the board at the u-boot prompt. Can you pls let me know how can I access/change the uboot params from the Linux user application.
Sorry if it's a repost..!!
Thanks you all for the help ..!!
Regards, Phaniram.K
________________________________ ::DISCLAIMER:: -----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------