On Sat, Mar 31, 2012 at 12:45 PM, Marek Vasut marek.vasut@gmail.com wrote:
Dear Aldo Brett Cedillo Martinez,
Configures GPMC, adds macros to enable net commands, and adds proper initialization to board_eth_init function.
Tom, are you OK with applying this patch ?
To be clear, lets ask Tom Rix, currently listed maintainer (this is http://patchwork.ozlabs.org/patch/71816/)
I have a similar patch to enable ethernet in zoom3 after initial support patch.
Signed-off-by: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com
board/logicpd/zoom2/zoom2.c | 21 +++++++++++++++++++++ include/configs/omap3_zoom2.h | 10 +++++++++- 2 files changed, 30 insertions(+), 1 deletions(-)
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index e9f6625..54d3e9f 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { 0x1D0904C4, 0 };
+/* Ethernet GPMC configuration */ +static u32 gpmc_eth[GPMC_MAX_REG] = {
- NET_GPMC_CONFIG1,
- NET_GPMC_CONFIG2,
- NET_GPMC_CONFIG3,
- NET_GPMC_CONFIG4,
- NET_GPMC_CONFIG5,
- NET_GPMC_CONFIG6, 0
+};
/* Used to track the revision of the board */ static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN;
@@ -130,6 +140,12 @@ int board_init (void) enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
+#ifdef CONFIG_CMD_NET
- gpmc_config = gpmc_eth;
- enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7],
- CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
+#endif /* (CONFIG_CMD_NET) */
/* board id for Linux */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2; /* boot param addr */ @@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_LAN91C96 rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); #endif
+#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
return rc; } #endif diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index eef95fe..c66d571 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -154,7 +154,7 @@ #undef CONFIG_CMD_FPGA /* FPGA configuration Support
*/
#undef CONFIG_CMD_IMI /* iminfo
*/
#undef CONFIG_CMD_IMLS /* List all found images
*/
-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot
*/
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot
*/
#undef CONFIG_CMD_NFS /* NFS support
*/
#define CONFIG_SYS_NO_FLASH @@ -165,6 +165,14 @@ #define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1
+/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 +#endif /* (CONFIG_CMD_NET) */
/* * TWL4030 */
Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot