Hi,
Thanks for your response. I want to tell few more things about our implementation.
Actually we are planning to simulate (but not implement) the file
system
and implement the SCSI transparent command set decoder. When ever a
file
You can also use USB DFU for this where you can transfer files to RAM or NAND partitions. DFU is not yet supported in Denx's uboot tree but is Available in openmoko's tree [http://git.openmoko.org/?p=u-boot.git;a=summary]. You will have to port back DFU feature from openmoko to Denx's tree.
Thanks for the hint Ajay. Let me add that DFU is also a "standard" protocol: http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
So many people will be able to enjoy this in addition to solving this very specific problem of Yogesh.
Detlev,
Actually I have ported DFU from openmoko to Denx tree and used it on OMAP3EVM. I hope it should work just fine on Beagle as well.
Will it be ok if I submit those patches to Denx's tree? Is there anyone Already working on this?
I have seen below page with the same proposal from Mike. http://elinux.org/CELF_Project_Proposal/Add_DFU_support_to_U-Boot
Mike, Are you working on this?
Regards, Ajay
Cheers Detlev
-- It's very important that you sleep because that's when your brain is garbage collecting. And a dream is if you are interrupted in the middle and have junk left in the registers. -- Gerald Sussman -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de