Dear Stefan Roese,
In message 201011231431.18905.sr@denx.de you wrote:
--- a/arch/powerpc/cpu/ppc4xx/Makefile +++ b/arch/powerpc/cpu/ppc4xx/Makefile @@ -37,9 +37,9 @@ COBJS := 40x_spd_sdram.o ifndef CONFIG_NAND_SPL ifndef CONFIG_NAND_U_BOOT COBJS += 44x_spd_ddr.o +COBJS-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o endif endif -COBJS-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o
This change introduces the problem with the kilauea/haleakala NAND booting images. Yes, I am aware that without this change, canyonlands_nand fails to build. I noticed this too right now. I'll send another patch to fix this canyonlands_nand build problem shortly.
Without this, kilauea/haleakala NAND boot configurations load the 44x_spd_ddr2 init code, which you said was not the correct thing.
So which is correct?
Best regards,
Wolfgang Denk