Hi,
On 12-03-15 04:13, Phil Han wrote:
From: Han Pengfei pengphei@sina.com
The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, NXP JN5168 zigbee gw, remote support.
Also see http://focalcrest.com/en/pc.html#pro02
Signed-off-by: Han Pengfei pengphei@sina.com
Thanks I've queued this up in u-boot-sunxi/next for merging upstream.
Regards,
Hans
board/sunxi/MAINTAINERS | 5 +++++ configs/mixtile_loftq_defconfig | 16 ++++++++++++++++ 2 files changed, 21 insertions(+) create mode 100644 configs/mixtile_loftq_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ef3c937..90a634e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -143,3 +143,8 @@ WEXLER-TAB7200 BOARD M: Aleksei Mamlin mamlinav@gmail.com S: Maintained F: configs/Wexler_TAB7200_defconfig
+MIXTILE-LOFTQ BOARD +M: Phil Han pengphei@sina.com +S: Maintained +F: configs/mixtile_loftq_defconfig diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig new file mode 100644 index 0000000..94ebdc8 --- /dev/null +++ b/configs/mixtile_loftq_defconfig @@ -0,0 +1,16 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_TARGET_MIXTILE_LOFTQ=y ++S:CONFIG_DRAM_CLK=312 ++S:CONFIG_DRAM_ZQ=251 ++S:CONFIG_MMC_SUNXI_SLOT=0 ++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# Vbus gpio for usb1 ++S:CONFIG_USB1_VBUS_PIN="PH24" +# No Vbus gpio for usb2 ++S:CONFIG_USB2_VBUS_PIN=""