On Tue, Jun 13, 2017 at 10:07:10AM +0530, 'Vignesh R' via BeagleBoard GSoC wrote:
On Monday 12 June 2017 10:12 PM, Jason Kridner wrote:
I see you submitted this defconfig: https://lists.denx.de/pipermail/u-boot/2016-November/272425.html
I have a Google Summer of Code student intern attempting to use it and he's seeing it hang without entering UMS mode. Details are below.
Can you give any advice on how you tested this?
Could you try this patch that I posted sometime back: https://patchwork.ozlabs.org/patch/748877/
Were you able to get this to compile and fit in the SRAM?
With the latest U-Boot and your patch I get the following on compile: arm-poky-linux-gnueabi-ld.bfd: u-boot-spl section `.rodata' will not fit in region `.sram' arm-poky-linux-gnueabi-ld.bfd: region `.sram' overflowed by 9928 bytes scripts/Makefile.spl:333: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 1 Makefile:1382: recipe for target 'spl/u-boot-spl' failed make: *** [spl/u-boot-spl] Error 2
I had to remove some of the other features to get it to fit in SRAM.
Here is the patch that I sent yesterday: https://patchwork.ozlabs.org/patch/774899/
I forgot to follow that up and looks like it did not make into the u-boot master branch.
Regards Vignesh
I believe he still needs to do something to explicitly enable UMS. Can you confirm?
Ravi,
If Stefan cannot answer, I'd suggest adjusting the default boot command to invoke UMS. Have you been able to stop the boot process using the serial port and get to the u-boot console? At the console, have you tried running the 'ums' command?
Regards, Jason
On Sun, Jun 11, 2017 at 4:18 PM Ravi Kumar Prasad 7ravikp@gmail.com wrote:
Hi, I'm porting BBBlfs bootloader server to nodejs. Now, after receiving tftp request for SPL, I'm transferring SPL. I built spl/uboot with config am335x_evm_usbspl_defconfig . After SPL transfer it fails to boot, here's the serial output:
U-Boot SPL 2017.07-rc1-00163-g8cb3ce6 (Jun 11 2017 - 01:09:02) SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###
Please help me to debug this problem. Code for server: https://github.com/ravikp7/node-beagle-boot Thanks Ravi
-- You received this message because you are subscribed to the Google Groups "BeagleBoard GSoC" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard-gsoc+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
-- Regards Vignesh
-- You received this message because you are subscribed to the Google Groups "BeagleBoard GSoC" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard-gsoc+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.