Dear Vikram Narayanan,
If in case this is valid according to the latest datasheet, ignore this patch.
-- According to REV C manual, the register IOMUXC_IOMUXC_GPR4 has bits 4 and 5 read-only and the value is always set as zero. So write '0' to these bits instead of writing '1'.
I'm acking this as writing 0 to read-only bits is the only rightous thing to do. btw. how did you find this? Good catch, praise on you :-)
Acked-by: Marek Vasut marex@denx.de
Signed-off-by: Vikram Narayanan vikram186@gmail.com Cc: Jason Liu r64343@freescale.com Cc: Dirk Behme dirk.behme@googlemail.com
board/freescale/mx6qarm2/imximage.cfg | 2 +- board/freescale/mx6qsabrelite/imximage.cfg | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index ceecbf9..bf941a3 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -167,7 +167,7 @@ DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF
# enable AXI cache for VDOA/VPU/IPU -DATA 4 0x020e0010 0xF00000FF +DATA 4 0x020e0010 0xF00000CF # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg index c389427..62498ab 100644 --- a/board/freescale/mx6qsabrelite/imximage.cfg +++ b/board/freescale/mx6qsabrelite/imximage.cfg @@ -164,7 +164,7 @@ DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF
# enable AXI cache for VDOA/VPU/IPU -DATA 4 0x020e0010 0xF00000FF +DATA 4 0x020e0010 0xF00000CF # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F
Best regards, Marek Vasut