SE HMIBSC board uses UART1 as the main debug console, so add corresponding clocks and pinmux support. Along with that update instructions to enable clocks for debug UART support.
Signed-off-by: Sumit Garg sumit.garg@linaro.org --- drivers/clk/qcom/clock-apq8016.c | 50 +++++++++++++++++++++----- drivers/pinctrl/qcom/pinctrl-apq8016.c | 1 + drivers/serial/serial_msm.c | 6 ++-- 3 files changed, 47 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index e6647f7c41d..a620a10a520 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -43,6 +43,14 @@ #define BLSP1_UART2_APPS_N (0x3040) #define BLSP1_UART2_APPS_D (0x3044)
+#define BLSP1_UART1_BCR (0x2038) +#define BLSP1_UART1_APPS_CBCR (0x203C) +#define BLSP1_UART1_APPS_CMD_RCGR (0x2044) +#define BLSP1_UART1_APPS_CFG_RCGR (0x2048) +#define BLSP1_UART1_APPS_M (0x204C) +#define BLSP1_UART1_APPS_N (0x2050) +#define BLSP1_UART1_APPS_D (0x2054) + /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(17)
@@ -77,7 +85,7 @@ static struct vote_clk gcc_blsp1_ahb_clk = { };
/* SDHCI */ -static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) +static int apq8016_clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) { int div = 15; /* 100MHz default */
@@ -94,6 +102,33 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) return rate; }
+static const struct bcr_regs uart1_regs = { + .cfg_rcgr = BLSP1_UART1_APPS_CFG_RCGR, + .cmd_rcgr = BLSP1_UART1_APPS_CMD_RCGR, + .M = BLSP1_UART1_APPS_M, + .N = BLSP1_UART1_APPS_N, + .D = BLSP1_UART1_APPS_D, +}; + +/* UART: 115200 */ +static int apq8016_clk_init_uart1(phys_addr_t base) +{ + /* Enable AHB clock */ + clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk); + + /* 7372800 uart block clock @ GPLL0 */ + clk_rcg_set_rate_mnd(base, &uart1_regs, 1, 144, 15625, + CFG_CLK_SRC_GPLL0, 16); + + /* Vote for gpll0 clock */ + clk_enable_gpll0(base, &gpll0_vote_clk); + + /* Enable core clk */ + clk_enable_cbc(base + BLSP1_UART1_APPS_CBCR); + + return 0; +} + static const struct bcr_regs uart2_regs = { .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, @@ -103,7 +138,7 @@ static const struct bcr_regs uart2_regs = { };
/* UART: 115200 */ -int apq8016_clk_init_uart(phys_addr_t base) +int apq8016_clk_init_uart2(phys_addr_t base) { /* Enable AHB clock */ clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk); @@ -127,14 +162,13 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate)
switch (clk->id) { case GCC_SDCC1_APPS_CLK: /* SDC1 */ - return clk_init_sdc(priv, 0, rate); - break; + return apq8016_clk_init_sdc(priv, 0, rate); case GCC_SDCC2_APPS_CLK: /* SDC2 */ - return clk_init_sdc(priv, 1, rate); - break; + return apq8016_clk_init_sdc(priv, 1, rate); case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */ - return apq8016_clk_init_uart(priv->base); - break; + return apq8016_clk_init_uart2(priv->base); + case GCC_BLSP1_UART1_APPS_CLK: /* UART1 */ + return apq8016_clk_init_uart1(priv->base); default: return 0; } diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c index db0e2124684..cb0e2227079 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c @@ -29,6 +29,7 @@ static const char * const msm_pinctrl_pins[] = { };
static const struct pinctrl_function msm_pinctrl_functions[] = { + {"blsp_uart1", 2}, {"blsp_uart2", 2}, };
diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c index ac4280c6c4c..eaf024a55b0 100644 --- a/drivers/serial/serial_msm.c +++ b/drivers/serial/serial_msm.c @@ -248,12 +248,14 @@ static struct msm_serial_data init_serial_data = { #include <debug_uart.h>
/* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */ -//int apq8016_clk_init_uart(phys_addr_t gcc_base); +//int apq8016_clk_init_uart1(phys_addr_t gcc_base); +//int apq8016_clk_init_uart2(phys_addr_t gcc_base);
static inline void _debug_uart_init(void) { /* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */ - //apq8016_clk_init_uart(0x1800000); + //apq8016_clk_init_uart1(0x1800000); + //apq8016_clk_init_uart2(0x1800000); uart_dm_init(&init_serial_data); }