Add more pfuze register offset. And switch mode definition.
Signed-off-by: Peng Fan Peng.Fan@freescale.com --- include/power/pfuze100_pmic.h | 53 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h index 1118489..7474afb 100644 --- a/include/power/pfuze100_pmic.h +++ b/include/power/pfuze100_pmic.h @@ -16,14 +16,34 @@ enum {
PFUZE100_SW1ABVOL = 0x20, PFUZE100_SW1ABSTBY = 0x21, + PFUZE100_SW1ABOFF = 0x22, + PFUZE100_SW1ABMODE = 0x23, PUZE_100_SW1ABCONF = 0x24, PFUZE100_SW1CVOL = 0x2e, PFUZE100_SW1CSTBY = 0x2f, + PFUZE100_SW1COFF = 0x30, + PFUZE100_SW1CMODE = 0x31, PFUZE100_SW1CCONF = 0x32, PFUZE100_SW2VOL = 0x35, + PFUZE100_SW2STBY = 0x36, + PFUZE100_SW2OFF = 0x37, + PFUZE100_SW2MODE = 0x38, + PFUZE100_SW2CONF = 0x39, PFUZE100_SW3AVOL = 0x3c, + PFUZE100_SW3ASTBY = 0x3D, + PFUZE100_SW3AOFF = 0x3E, + PFUZE100_SW3AMODE = 0x3F, + PFUZE100_SW3ACONF = 0x40, PFUZE100_SW3BVOL = 0x43, + PFUZE100_SW3BSTBY = 0x44, + PFUZE100_SW3BOFF = 0x45, + PFUZE100_SW3BMODE = 0x46, + PFUZE100_SW3BCONF = 0x47, PFUZE100_SW4VOL = 0x4a, + PFUZE100_SW4STBY = 0x4b, + PFUZE100_SW4OFF = 0x4c, + PFUZE100_SW4MODE = 0x4d, + PFUZE100_SW4CONF = 0x4e, PFUZE100_SWBSTCON1 = 0x66, PFUZE100_VREFDDRCON = 0x6a, PFUZE100_VSNVSVOL = 0x6b, @@ -177,5 +197,38 @@ enum { #define SWBST_MODE_AUTO (2 << 2) #define SWBST_MODE_APS (2 << 3)
+/* + * Regulator Mode Control + * + * OFF: The regulator is switched off and the output voltage is discharged. + * PFM: In this mode, the regulator is always in PFM mode, which is useful + * at light loads for optimized efficiency. + * PWM: In this mode, the regulator is always in PWM mode operation + * regardless of load conditions. + * APS: In this mode, the regulator moves automatically between pulse + * skipping mode and PWM mode depending on load conditions. + * + * SWxMODE[3:0] + * Normal Mode | Standby Mode | value + * OFF OFF 0x0 + * PWM OFF 0x1 + * PFM OFF 0x3 + * APS OFF 0x4 + * PWM PWM 0x5 + * PWM APS 0x6 + * APS APS 0x8 + * APS PFM 0xc + * PWM PFM 0xd + */ +#define OFF_OFF 0x0 +#define PWM_OFF 0x1 +#define PFM_OFF 0x3 +#define APS_OFF 0x4 +#define PWM_PWM 0x5 +#define PWM_APS 0x6 +#define APS_APS 0x8 +#define APS_PFM 0xc +#define PWM_PFM 0xd + int power_pfuze100_init(unsigned char bus); #endif