Add Bananapi Zero board defconfig and device tree. OTG device is supported with enabling clock and adding necessary controller configuration change. USB mass storage is tested as a test case.
Jun Nie (6): sunxi: h3: add usb_otg and OHCI/EHCI for usbc0 on H3 sunxi: musb: Add fifo config for H3 sunxi: musb: Enable OTG device clock for H3 sunxi: musb: Hack dynamic fifo support for H3 OTG sunxi: usb_phy: Clear PHYCTL register before writing sunxi: Add initial Banana-Pi Zero support
arch/arm/dts/Makefile | 1 + arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 113 ++++++++++++++++++++++++ arch/arm/dts/sun8i-h3.dtsi | 32 +++++++ arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 2 + arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 + arch/arm/mach-sunxi/usb_phy.c | 8 +- configs/bananapi_zero_defconfig | 17 ++++ drivers/usb/musb-new/musb_regs.h | 3 +- drivers/usb/musb-new/sunxi.c | 51 +++++++++++ 9 files changed, 229 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts create mode 100644 configs/bananapi_zero_defconfig