On Thu, Aug 02, 2018 at 07:47:35AM -0500, Adam Ford wrote:
Is there a maintainer for the omap_gpmc driver? Only the u-boot open list is returned when queried.
./scripts/get_maintainer.pl ./drivers/mtd/nand/omap_gpmc.c u-boot@lists.denx.de (open list)I was thinking about (but not promising) adding some device tree support to enable fetching GPMC timings from device tree and configuring and/or re-configuring the GPMC timings based on DT contents.
I wanted to shoot my ideas off someone else and/or not duplicate any work, but I am not volunteering to take over this driver.
Mostly because the GPMC timings setup for NAND and NOR are fairly generic for NAND/NOR, and it would be nice to optimize them a bit to see if we could get a little faster performance when loading ramdisks or kernels via GPMC. Some peripherals (like ethernet) use the GPMC bus, and we have some hard-coded values, but this kind of information can be fetched from device trees and may also yield a little bit of optimization.
Ah, there is not a specific maintainer for the driver.