Re: [U-Boot] [PATCH 1/2] arm: dts: odroid-c2: assign mmc device number 0 to eMMC slot

Am 14.04.2017 um 10:24 schrieb Heiner Kallweit:

In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot was assigned dev number 1 (0 is the SD slot). So on uboot prompt

U-Boot

we had to manually switch the mmc device first. Therefore change the device number assignment.

Objection, this differs from Linux and will be overwritten on next dts sync.

Regards, Andreas

Signed-off-by: Heiner Kallweit hkallweit1@gmail.com

arch/arm/dts/meson-gxbb-odroidc2.dts | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index c737183..5ec67ca 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -53,6 +53,8 @@

aliases { serial0 = &uart_AO;

• mmc0 = &sd_emmc_c;
  

• mmc1 = &sd_emmc_b;
  

  };

  chosen {