From: Kishon Vijay Abraham I kishon@ti.com
In order to enable DDR mode, Dual Data Rate mode bit has to be set in MMCHS_CON register. Set it here.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com ---
arch/arm/include/asm/omap_mmc.h | 1 + drivers/mmc/omap_hsmmc.c | 5 +++++ 2 files changed, 6 insertions(+)
diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h index 3f94f2e..341a2e2 100644 --- a/arch/arm/include/asm/omap_mmc.h +++ b/arch/arm/include/asm/omap_mmc.h @@ -89,6 +89,7 @@ struct omap_hsmmc_plat { #define WPP_ACTIVEHIGH (0x0 << 8) #define RESERVED_MASK (0x3 << 9) #define CTPL_MMC_SD (0x0 << 11) +#define DDR (0x1 << 19) #define DMA_MASTER (0x1 << 20) #define BLEN_512BYTESLEN (0x200 << 0) #define NBLK_STPCNT (0x0 << 16) diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index a65005f..5f5fd90 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -271,6 +271,11 @@ static void omap_hsmmc_set_timing(struct mmc *mmc) val &= ~AC12_UHSMC_MASK; priv->mode = mmc->selected_mode;
+ if (mmc_is_mode_ddr(priv->mode)) + writel(readl(&mmc_base->con) | DDR, &mmc_base->con); + else + writel(readl(&mmc_base->con) & ~DDR, &mmc_base->con); + switch (priv->mode) { case MMC_HS_200: case UHS_SDR104: