On Sun, Jan 24, 2010 at 5:54 AM, Tom Tom.Rix@windriver.com wrote:
Khasim Syed Mohammed wrote:
From fe824eb530338182503dd75d466374ac2e96c063 Mon Sep 17 00:00:00 2001 From: Syed Mohammed Khasim khasim@ti.com Date: Mon, 18 Jan 2010 18:35:40 +0530 Subject: [PATCH] Enable DSS driver for Beagle
Configures DSS to display color bar on Svideo Configures DSS to display background color on DVID
Signed-off-by: Syed Mohammed Khasim khasim@ti.com
board/ti/beagle/beagle.c | 12 ++++++ board/ti/beagle/beagle.h | 75 ++++++++++++++++++++++++++++++++++++++++ include/configs/omap3_beagle.h | 1 + 3 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 23985ea..2bf0430 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -114,6 +114,16 @@ void beagle_identify(void) }
/*
- Configure DSS to display background color on DVID
- Configure VENC to display color bar on S-Video
- */
+void display_init(void)
This should be static
ok
+{
- omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT,
VENC_WIDTH);
- omap3_dss_panel_config(&dvid_cfg);
+}
+/* * Routine: misc_init_r * Description: Configure board specific parts */ @@ -124,6 +134,7 @@ int misc_init_r(void)
twl4030_power_init(); twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
- display_init();
Should be if-defed to CONFIG_VIDEO_OMAP3
ok
/* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); @@ -139,6 +150,7 @@ int misc_init_r(void) beagle_identify();
dieid_num_r();
- omap3_dss_enable();
Should be if-defed to CONFIG_VIDEO_OMAP3
ok
return 0; } diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index d1d5d27..3605427 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -23,6 +23,8 @@ #ifndef _BEAGLE_H_ #define _BEAGLE_H_
+#include <asm/arch/dss.h>
const omap3_sysinfo sysinfo = { DDR_STACKED, "OMAP3 Beagle board", @@ -385,4 +387,77 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/
This section is dss. This should move to dss.c or dss.h
+/*
- Display Configuration
- */
+#define DVI_BEAGLE_ORANGE_COL 0x00FF8000 +#define VENC_HEIGHT 0x00ef +#define VENC_WIDTH 0x027f
No, they are board specific, so should be in board file. They don't belong to DSS.
+/*
- Configure VENC in DSS for Beagle to generate Color Bar
- Kindly refer to OMAP TRM for definition of these values.
- */
No good enough. If you are going to refer people to TRM. Give them some idea how to find the data. The name of TRM, the section and maybe quote to help them find the location..
Sure.
15.5.8.4 Video Encoder Register Settings
For video encoder programming, see Table 15-67. This table lists the register values to use in standard applications. These values are validated programming values only for the TV display support (NTSC 601 and PAL 601 standards). Table 15-67. Video Encoder Register Programming Values Register Name NTSC 601 PAL 601 VENC_F_CONTROL 0x00000000 0x00000000 VENC_VIDOUT_CTRL 0x00000001 0x00000001 VENC_SYNC_CTRL 0x00008040 0x00000040 VENC_LLEN 0x00000359 0x0000035F VENC_FLENS
HUH .... :) :) :)
I was under an impression that people who really code, read TRM and they don't need this level of details. I will give the section details for sure.
But I feel you are asking some thing un necessarily more.... There are tons of programming, if every one does this then u-boot code will become a document portal. :)
You need to qualify std_tv as either ntsc or pal.
I was not interested in confusing others on the ntsc or pal. But any way I test NTSC, I can change the name accordingly. I will not add the structure for PAL, will wait for some one to send out patch for PAL if interested.
Include both setting. If it is impossible to test PAL, make a note with a big warning
Why warning when I am saying that it is NTSC, can we not understand that NTSC is not PAL :)
+static const struct venc_regs venc_config_std_tv = {
- .status = 0x0000001B,
- .f_control = 0x00000040,
- .vidout_ctrl = 0x00000000,
?? not 1
- .sync_ctrl = 0x00008000,
?? not 8040 or 40
- .llen = 0x00008359,
?? not 359 or 35F
Likely you are using a different TRM than I am. Please check if there isn't some dependency on dss silicon revision.
There might be some differences, I am taking values that were working before for me from the kernel. If some one needs they can do the TRM comparison, PLEASE UNDERSTAND this is not for building your PRODUCT around this, it is for TESTING THE BOARD FOR TV OUT And nothing BEYOND THIS. Hope you understand the need for this driver in u-boot.
You always have access to TRM and register definition, they can see what is getting changed and why.
Regards, Khasim