Use the same prop as linux to control the use of fifo or dma mode. Also add a u-boot,spl-sfc-no-dma prop to control the same in SPL.
Signed-off-by: Jonas Karlman jonas@kwiboo.se Reviewed-by: Kever Yang kever.yang@rock-chips.com --- v2: - Use IS_ENABLED(CONFIG_SPL_BUILD) instead of ifdef - Collect r-b tag
drivers/spi/rockchip_sfc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c index 851a6482985b..596c22aa0108 100644 --- a/drivers/spi/rockchip_sfc.c +++ b/drivers/spi/rockchip_sfc.c @@ -227,10 +227,10 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus) struct rockchip_sfc *sfc = dev_get_plat(bus);
sfc->regbase = dev_read_addr_ptr(bus); - if (ofnode_read_bool(dev_ofnode(bus), "sfc-no-dma")) - sfc->use_dma = false; - else - sfc->use_dma = true; + sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma"); + + if (IS_ENABLED(CONFIG_SPL_BUILD) && sfc->use_dma) + sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma");
#if CONFIG_IS_ENABLED(CLK) int ret;