On Thu, Aug 29, 2024 at 8:24 AM Hiago De Franco hiagofranco@gmail.com wrote:
From: Rogerio Guerra Borin rogerio.borin@toradex.com
Set the CONFIG_SPL_LOAD_FIT_ADDRESS for both verdin-imx8mm and verdin-imx8mp configurations to specify the load address for FIT images loaded by the SPL.
As per lastest instructions from NXP, the generation of a HABv4 CSF (Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load address to be set to a fixed value when binman is used. The address is defined by CONFIG_SPL_LOAD_FIT_ADDRESS.
Here we set CONFIG_SPL_LOAD_FIT_ADDRESS to an address 64MB past the start of the DDR memory leaving plenty of room for the various DDR- residing artifacts to be moved to their usual load addresses which are close to the start of the DDR.
Signed-off-by: Rogerio Guerra Borin rogerio.borin@toradex.com Signed-off-by: Hiago De Franco hiago.franco@toradex.com
Applied, thanks.