Add device tree based on evaluation board pcb111.
Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com --- arch/mips/dts/jr2_pcb111.dts | 74 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 arch/mips/dts/jr2_pcb111.dts
diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/mips/dts/jr2_pcb111.dts new file mode 100644 index 0000000..f1af66f --- /dev/null +++ b/arch/mips/dts/jr2_pcb111.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "mscc,jr2.dtsi" + +/ { + model = "Jaguar2 Cu48 PCB111 Reference Board"; + compatible = "mscc,jr2-pcb111", "mscc,jr2"; + + aliases { + spi0 = &spi0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status_green { + label = "pcb111:green:status"; + gpios = <&gpio 12 0>; + default-state = "on"; + }; + + status_red { + label = "pcb111:red:status"; + gpios = <&gpio 13 0>; + default-state = "off"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + spi-flash@0 { + compatible = "spi-flash"; + spi-max-frequency = <18000000>; /* input clock */ + reg = <0>; /* CS0 */ + }; +}; + +&gpio { + /* SPIO only use DO, CLK, no inputs */ + sgpio1_pins: sgpio1-pins { + pins = "GPIO_4", "GPIO_5"; + function = "sio1"; + }; +}; + +&sgpio { + status = "okay"; + sgpio-ports = <0xffffffff>; +}; + +&sgpio1 { + status = "okay"; + sgpio-ports = <0x001effff>; +}; + +&sgpio2 { + status = "okay"; + sgpio-ports = <0xff000000>; + gpio-ranges = <&sgpio2 0 0 96>; +};