From: Alexander Sverdlin alexander.sverdlin@siemens.com
am65_cpsw_ofdata_parse_phy() tries to handle the case when PHY is not specified in DT gracefully:
am65_cpsw_nuss_port ethernet@8000000port@1: can't parse phy-handle port 1 (-2)
am65_cpsw_mdio_init() is turn is prepared for this, checks if priv->has_phy == 0 and bails out (leaving cpsw_common->bus == NULL).
am65_cpsw_phy_init() however is not prepared for this and calls phy_connect(cpsw_common->bus, ...) unconditionally, which leads to:
"Synchronous Abort" handler, esr 0x8600000d, far 0x0 elr: ffffffff808ab000 lr : 000000008083bde4 (reloc)
where lr points to the instruction right after bus->read() in get_phy_id().
Fixes: 9d0dca1199d1 ("net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver") Signed-off-by: Alexander Sverdlin alexander.sverdlin@siemens.com --- drivers/net/ti/am65-cpsw-nuss.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ti/am65-cpsw-nuss.c b/drivers/net/ti/am65-cpsw-nuss.c index 6da018c0f9d5..d1e452b6b43c 100644 --- a/drivers/net/ti/am65-cpsw-nuss.c +++ b/drivers/net/ti/am65-cpsw-nuss.c @@ -722,6 +722,9 @@ static int am65_cpsw_phy_init(struct udevice *dev) u32 supported = PHY_GBIT_FEATURES; int ret;
+ if (!priv->has_phy || !cpsw_common->bus) + return 0; + phydev = phy_connect(cpsw_common->bus, priv->phy_addr, priv->dev,