From: Mason Huo mason.huo@starfivetech.com
Enable and add pinctrl configuration for PCIe host controller. Also add JH7110 stg syscon configuration.
Signed-off-by: Mason Huo mason.huo@starfivetech.com Signed-off-by: Minda Chen minda.chen@starfivetech.com --- .../dts/jh7110-starfive-visionfive-2.dtsi | 11 +++ arch/riscv/dts/jh7110.dtsi | 74 +++++++++++++++++++ 2 files changed, 85 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi index c6b6dfa940..12245576ac 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi @@ -7,6 +7,7 @@
#include "jh7110.dtsi" #include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> +#include <dt-bindings/gpio/gpio.h> / { aliases { serial0 = &uart0; @@ -300,6 +301,16 @@ }; };
+&pcie0 { + reset-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&pcie1 { + reset-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &syscrg { assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>, <&syscrg JH7110_SYSCLK_BUS_ROOT>, diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi index bd60879615..eaf8035a61 100644 --- a/arch/riscv/dts/jh7110.dtsi +++ b/arch/riscv/dts/jh7110.dtsi @@ -569,5 +569,79 @@ gpio-controller; #gpio-cells = <2>; }; + + pcie0: pcie@2B000000 { + compatible = "starfive,jh7110-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0x0 0x2B000000 0x0 0x1000000>, + <0x9 0x40000000 0x0 0x10000000>; + reg-names = "reg", "config"; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + msi-parent = <&plic>; + interrupts = <56>; + interrupt-controller; + interrupt-names = "msi"; + interrupt-parent = <&plic>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>, + <0x0 0x0 0x0 0x2 &plic 0x2>, + <0x0 0x0 0x0 0x3 &plic 0x3>, + <0x0 0x0 0x0 0x4 &plic 0x4>; + resets = <&stgcrg JH7110_STGRST_PCIE0_MST0>, + <&stgcrg JH7110_STGRST_PCIE0_SLV0>, + <&stgcrg JH7110_STGRST_PCIE0_SLV>, + <&stgcrg JH7110_STGRST_PCIE0_BRG>, + <&stgcrg JH7110_STGRST_PCIE0_CORE>, + <&stgcrg JH7110_STGRST_PCIE0_APB>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE0_TL>, + <&stgcrg JH7110_STGCLK_PCIE0_AXI>, + <&stgcrg JH7110_STGCLK_PCIE0_APB>; + clock-names = "noc_bus_stg_axi", "pcie0_tl", "pcie0_axi", "pcie0_apb"; + status = "disabled"; + }; + + pcie1: pcie@2C000000 { + compatible = "starfive,jh7110-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0x0 0x2C000000 0x0 0x1000000>, + <0x9 0xc0000000 0x0 0x10000000>; + reg-names = "reg", "config"; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon 0x270 0x274 0x2e0>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, + <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; + msi-parent = <&plic>; + interrupts = <57>; + interrupt-controller; + interrupt-names = "msi"; + interrupt-parent = <&plic>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>, + <0x0 0x0 0x0 0x2 &plic 0x2>, + <0x0 0x0 0x0 0x3 &plic 0x3>, + <0x0 0x0 0x0 0x4 &plic 0x4>; + resets = <&stgcrg JH7110_STGRST_PCIE1_MST0>, + <&stgcrg JH7110_STGRST_PCIE1_SLV0>, + <&stgcrg JH7110_STGRST_PCIE1_SLV>, + <&stgcrg JH7110_STGRST_PCIE1_BRG>, + <&stgcrg JH7110_STGRST_PCIE1_CORE>, + <&stgcrg JH7110_STGRST_PCIE1_APB>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE1_TL>, + <&stgcrg JH7110_STGCLK_PCIE1_AXI>, + <&stgcrg JH7110_STGCLK_PCIE1_APB>; + clock-names = "noc_bus_stg_axi", "pcie1_tl", "pcie1_axi", "pcie1_apb"; + status = "disabled"; + }; }; };