Add DTS files for Pogoplug V4 board
Signed-off-by: Tony Dinh mibodhi@gmail.com ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/kirkwood-pogoplug_v4.dts | 145 ++++++++++++++++++++++++++ 2 files changed, 146 insertions(+) create mode 100644 arch/arm/dts/kirkwood-pogoplug_v4.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7f622fedbd..716c6c0ed2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ kirkwood-pogo_e02.dtb \ + kirkwood-pogoplug_v4.dtb \ kirkwood-sheevaplug.dtb
dtb-$(CONFIG_MACH_S900) += \ diff --git a/arch/arm/dts/kirkwood-pogoplug_v4.dts b/arch/arm/dts/kirkwood-pogoplug_v4.dts new file mode 100644 index 0000000000..b4754f600e --- /dev/null +++ b/arch/arm/dts/kirkwood-pogoplug_v4.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2014-2021 Tony Dinh mibodhi@gmail.com + * + * Device tree file for the Pogoplug V4/Mobile + * + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi" + +/ { + model = "Pogoplug v4"; + compatible = "cloudengines,pogoplug-v4", "cloudengines,pogoplug-mobile", + "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_led_green: pmx-led-green { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_red: pmx-led-red { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_button_eject: pmx-button-eject { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + /* No WP GPIO */ + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_red &pmx_led_green>; + pinctrl-names = "default"; + + health { + label = "status:green:health"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + fault { + label = "status:red:fault"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_eject>; + pinctrl-names = "default"; + + button@1 { + label = "Eject Button"; + linux,code = <KEY_EJECTCD>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x200000 0x300000>; + }; + + partition@500000 { + label = "uImage2"; + reg = <0x500000 0x300000>; + }; + + partition@800000 { + label = "failsafe"; + reg = <0x800000 0x800000>; + }; + + partition@1000000 { + label = "root"; + reg = <0x1000000 0x7000000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +};