Dear Andy Fleming,
On Wed, Jul 11, 2012 at 4:29 AM, Huang Changming-R66093
r66093@freescale.com wrote:
Hi, Andy, There is not any feedback for very long time, Could it be applied to the u-boot?
I'm afraid I have to reject this patch. We need to find a better solution to the two problems:
- We want to change cards and still have mmc commands work
- We don't want eMMC devices to be slowed down by constantly
re-initializing their cards.
Normally, I would err on the side of #1, but there's a simple workaround. If you replace the card, execute "mmc rescan", and the card will be reinitialized. Please let me know if that workaround doesn't work. I hope, in the future, we'll have some code which makes both possible, by being able to detect that a card has been changed, but for now I think the current system is reasonably satisfactory to both cases #1 and #2.
Andy, I don't want to be a bastard, but do you happen to be overloaded? Or what is the exact reason your replies to patches are so slow?
Best regards, Marek Vasut