Hi Michal,
I just tried to run the latest u-boot master + a few patches to implement generic PSCI RTS support on zynqmp and got this:
e U-Boot 2016.09-rc1-00453-ga0592f1 (Aug 16 2016 - 20:27:40 +0200) Xilinx ZynqMP ZCU102
I2C: ready DRAM: 4 GiB EL Level: EL2 MMC: sdhci@ff170000: 0 Using default environment
In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Bootmode: SD_MODE1 SCSI: SATA link 0 timeout. Target spinup took 0 ms. AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst scanning bus for devices... "Synchronous Abort" handler, esr 0x96000004 ELR: 7ff42d20 LR: 7ff3ff10 x0 : 0000000000000000 x1 : 0000000000000000 x2 : 0000000000000001 x3 : 000000007df1aa80 x4 : aaaaaaaaaaaaaaaa x5 : 0000000000000001 x6 : 0000000000000200 x7 : 0000000000000004 x8 : 000000007ff9f800 x9 : 0000000000000008 x10: 000000007ff9f8f0 x11: 0000000000000000 x12: 00000000ffffffff x13: 00000000ffffffff x14: 000000007ff8242f x15: 000000007ff82435 x16: 000000007ff84388 x17: 000000007ff84388 x18: 000000007df1ade8 x19: 000000007df1aa80 x20: 000000007ff92cb8 x21: 000000007ff9f800 x22: 000000007ff9f000 x23: 0000000000000078 x24: 000000007ff9f8f0 x25: 0000000000000000 x26: 000000007ff9f800 x27: 000000007ff9f000 x28: 000000007ff9fb00 x29: 000000007df1aca0
Resetting CPU ...
resetting …
Is this a known problem?
Alex