13 Aug
2015
13 Aug
'15
3:17 p.m.
On Mon, Jun 29, 2015 at 09:10:48AM +0200, Heiko Schocher wrote:
add support for the at91sam9260 based board smartweb from siemens. SPL is used without serial support, as this SoC has only 4k sram for running SPL. Here a U-Boot bootlog:
RomBOOT
U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200)
CPU: AT91SAM9260 Crystal frequency: 18.432 MHz CPU clock : 198.656 MHz Master clock : 99.328 MHz Watchdog enabled DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: macb0 Hit any key to stop autoboot: 0 U-Boot>
Signed-off-by: Heiko Schocher hs@denx.de
Applied to u-boot/master, thanks!
--
Tom