Marek Vasut marex@denx.de Thursday 20th June 2019 22:55:
It is likely that the DM conversion of EHCI iMX6 driver was a derivative of EHCI VF, however the conversion is incomplete and is missing the bind workaround, which updates dev->seq number. Without this, all controllers have dev->seq number 0 . Add this bind workaround into EHCI iMX6 driver as well.
Signed-off-by: Marek Vasut marex@denx.de Cc: Abel Vesa abel.vesa@nxp.com Cc: Adam Ford aford173@gmail.com Cc: Fabio Estevam festevam@gmail.com Cc: Ludwig Zenz lzenz@dh-electronics.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Vagrant Cascadian vagrant@debian.org
drivers/usb/host/ehci-mx6.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 33abfeada0..109ed7ed4a 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -503,6 +503,22 @@ static int ehci_usb_ofdata_to_platdata(struct udevice *dev) return 0; }
+static int ehci_usb_bind(struct udevice *dev) +{
- static int num_controllers;
- /*
* Without this hack, if we return ENODEV for USB Controller 0, on* probe for the next controller, USB Controller 1 will be given a* sequence number of 0. This conflicts with our requirement of* sequence numbers while initialising the peripherals.*/- dev->req_seq = num_controllers;
- num_controllers++;
- return 0;
+}
static int ehci_usb_probe(struct udevice *dev) { struct usb_platdata *plat = dev_get_platdata(dev); @@ -564,6 +580,7 @@ U_BOOT_DRIVER(usb_mx6) = { .id = UCLASS_USB, .of_match = mx6_usb_ids, .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
- .bind = ehci_usb_bind, .probe = ehci_usb_probe, .remove = ehci_deregister, .ops = &ehci_usb_ops,
-- 2.20.1
Tested-by: Ludwig Zenz lzenz@dh-electronics.com
Thanks, Regards Ludwig Zenz