On Wed, Feb 12, 2020 at 11:14 PM Igor Opaniuk igor.opaniuk@gmail.com wrote:
From: Igor Opaniuk igor.opaniuk@toradex.com
Convert README to reStructuredText format.
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com
board/toradex/verdin-imx8mm/README | 88 ---------------------- doc/board/toradex/index.rst | 1 + doc/board/toradex/verdin-imx8mm.rst | 112 ++++++++++++++++++++++++++++ 3 files changed, 113 insertions(+), 88 deletions(-) delete mode 100644 board/toradex/verdin-imx8mm/README create mode 100644 doc/board/toradex/verdin-imx8mm.rst
diff --git a/board/toradex/verdin-imx8mm/README b/board/toradex/verdin-imx8mm/README deleted file mode 100644 index 1dac969476..0000000000 --- a/board/toradex/verdin-imx8mm/README +++ /dev/null @@ -1,88 +0,0 @@ -U-Boot for the Toradex Verdin iMX8M Mini Module
-Quick Start
-- Build the ARM trusted firmware binary -- Get the DDR firmware -- Build U-Boot -- Flash to eMMC -- Boot
-Get and Build the ARM Trusted Firmware (Trusted Firmware A)
-$ echo "Downloading and building TF-A..." -$ git clone -b imx_4.14.98_2.3.0 https://source.codeaurora.org/external/imx/imx-atf -$ cd imx-atf
-Please edit `plat/imx/imx8mm/include/platform_def.h` so it contains proper -values for UART configuration and BL31 base address (correct values listed -below): -#define BL31_BASE 0x910000 -#define IMX_BOOT_UART_BASE 0x30860000 -#define DEBUG_CONSOLE 1
-Then build ATF (TF-A): -$ make PLAT=imx8mm bl31
-Get the DDR Firmware
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin -$ chmod +x firmware-imx-8.4.1.bin -$ ./firmware-imx-8.4.1.bin -$ cp firmware-imx-8.4.1/firmware/ddr/synopsys/lpddr4*.bin ./
-Build U-Boot
-$ export CROSS_COMPILE=aarch64-linux-gnu- -$ make verdin-imx8mm_defconfig -$ make flash.bin
-Flash to eMMC
-> tftpboot ${loadaddr} flash.bin -> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 -> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
-As a convenience, instead of the last two commands one may also use the update -U-Boot wrapper: -> run update_uboot
-Boot
-ATF, U-boot proper and u-boot.dtb images are packed into FIT image,
nits: U-Boot
-which is loaded and parsed by SPL.
-Boot sequence is: -SPL ---> ATF (TF-A) ---> U-boot proper
nits: U-Boot
-Output:
Reviewed-by: Bin Meng bmeng.cn@gmail.com
Will fix the nits when applying