Hi Tim
On Tue, 2021-10-12 at 12:46 -0700, Tim Harvey wrote:
On Sat, Oct 9, 2021 at 1:43 PM Marcel Ziswiler marcel@ziswiler.com wrote:
From: Marcel Ziswiler marcel.ziswiler@toradex.com
An assortment of fixes and improvements like an Ethernet PHY configuration fix, DEK blob encapsulation preparation, migration to using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0 hardware support [1], renaming kernel image variable, using preboot for fdtfile evaluation and watchdog pinctrl fix.
Note that this series is applied on top of Peng's Makefile fix [2] as otherwise, it may not quite generate all binman artefacts in the right order as discussed here [3].
[1] https://developer.toradex.com/verdin-sample-phase-over [2] https://marc.info/?l=u-boot&m=162908373904742 [3] https://marc.info/?l=u-boot&m=162945614207220
Changes in v6:
- New patch re-ordering fdt nodes and properties.
- Update commit message as requested by Wolfgang.
Changes in v5:
- Drop device tree part already done by Marek's patch.
- Add another fixes tag as his patch forgot the board code part.
- Re-based on top of u-boot-imx, master yet again.
Changes in v4:
- Add Heiko Schocher's reviewed-by tag.
- Fix copyright periods.
- Re-based.
Changes in v3:
- Case fold hex string.
- Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from
imx8mm-evk and postpone further improvements to after migrating to a common binman config as agreed with Frieder and Simon.
- New patch cleaning up include order.
- Add Fabio's reviewed-by tag.
- Fix patch.
- Add missing apalis-imx8 part.
- While at it update copyright year resp. period.
- Fix closing endif comment.
Changes in v2:
- Explicitly pass filename to binman when generating binaries as
suggested by Heiko.
- Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
pointed out by Heiko.
- Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation")
as a similar fix was already refused earlier.
- New patch allows booting recent embedded Linux BSPs.
- New patch addressing dynamic fdtfile definition.
- New patch fixing watchdog pinctrl issue.
Igor Opaniuk (1): verdin-imx8mm: use preboot for fdtfile evaluation
Marcel Ziswiler (7): imx8m: clean-up kconfig indentation verdin-imx8mm: fix ethernet ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation arm64: dts: imx8mm-verdin-u-boot.dtsi: alphabetically re-order verdin-imx8mm: switch to use binman to pack images verdin-imx8mm: clean-up include order verdin-imx8mm: fix watchdog pinctrl issue
Max Krummenacher (2): verdin-imx8mm: enable sleep_moci output verdin-imx8mm: drop support for v1.0 hardware
Oleksandr Suvorov (1): include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable
arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 147 +++++++++++++++++++- arch/arm/dts/imx8mm-verdin.dts | 18 +++ arch/arm/mach-imx/imx8m/Kconfig | 21 +-- board/toradex/verdin-imx8mm/imximage.cfg | 11 +- board/toradex/verdin-imx8mm/verdin-imx8mm.c | 81 +---------- configs/verdin-imx8mm_defconfig | 6 +- doc/board/toradex/verdin-imx8mm.rst | 53 ++++--- include/configs/apalis-imx8.h | 6 +- include/configs/verdin-imx8mm.h | 10 +- 9 files changed, 220 insertions(+), 133 deletions(-)
-- 2.26.2
Marcel,
I've tested your series with mx8mm-venice and did not see any issues.
Note that I have currently several patch series in-flight. I assume you meant this to go here [1] instead, not?
Tested-by: Tim Harvey tharvey@gateworks.com for imx8mm-venice-* boards
Thanks, the common u-boot.dtsi is nice to see!
Thanks!
I have a couple of patches that have not been picked up by Stefano yet due to I believe merge conflicts becuase his imx tree is behind master with respect to some of the Kconfig patches. You are likely in the same boat.
Yeah, however, with his pulls from Thursday evening imx/master is now based on commit ea67f467a43 ("Merge branch '2021-10-06-assorted-improvements'") which is very close to todays origin/master. So I don't think there should be any more conflicts if your stuff is re-based either on top of imx/master or origin/master.
Stefano, is it best for me to rebase my 'imx8mm_venice: switch to use binman to pack images' and 'board: gateworks: venice: add imx8mn-gw7902 support' patches on your tree or are you going to be merging in origin/master soon?
Best regards,
Tim
[1] https://marc.info/?l=u-boot&m=163372696806292
Cheers
Marcel