The binman_linux.dtsi is a fork of binman.dtsi, just change the first section image from the "u-boot" to "linux". Note that the filename is also changed. In binman.dtsi, the filename of u-boot section filename is called "u-boot-nodtb.bin". In binman_linux.dtsi, the filename should be called "Image", which is located in linux/arch/riscv/boot.
Signed-off-by: Randolph randolph@andestech.com --- arch/riscv/dts/binman_linux.dtsi | 79 ++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 arch/riscv/dts/binman_linux.dtsi
diff --git a/arch/riscv/dts/binman_linux.dtsi b/arch/riscv/dts/binman_linux.dtsi new file mode 100644 index 0000000000..334d64bc40 --- /dev/null +++ b/arch/riscv/dts/binman_linux.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2021, Bin Meng bmeng.cn@gmail.com + */ + +#include <config.h> + +/ { + binman: binman { + multiple-images; + }; +}; + +&binman { + itb { + filename = "linux.itb"; + + fit { + description = "Configuration to load OpenSBI before Linux"; + #address-cells = <1>; + fit,fdt-list = "of-list"; + + images { + linux { + description = "Linux"; + type = "standalone"; + os = "Linux"; + arch = "riscv"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + + linux_blob: blob-ext { + filename = "Image"; + }; + }; + + opensbi { + description = "OpenSBI fw_dynamic Firmware"; + type = "firmware"; + os = "opensbi"; + arch = "riscv"; + compression = "none"; + load = <CONFIG_SPL_OPENSBI_LOAD_ADDR>; + entry = <CONFIG_SPL_OPENSBI_LOAD_ADDR>; + + opensbi_blob: opensbi { + filename = "fw_dynamic.bin"; + missing-msg = "opensbi"; + }; + }; + +#ifndef CONFIG_OF_BOARD + @fdt-SEQ { + description = "NAME"; + type = "flat_dt"; + compression = "none"; + }; +#endif + }; + + configurations { + default = "conf-1"; + +#ifndef CONFIG_OF_BOARD + @conf-SEQ { +#else + conf-1 { +#endif + description = "NAME"; + firmware = "opensbi"; + loadables = "linux"; +#ifndef CONFIG_OF_BOARD + fdt = "fdt-SEQ"; +#endif + }; + }; + }; + }; +};