Hi B.
Thanks for your attention!
Bad Data CRC don't help.
Because, many possible issue will cause this issue.
I will provide the log.
Consider you use 16bit NAND flash. Have you define
CONFIG_SYS_NAND_DBW_16 in board configuration header?
Yes I did that. Before I include this definition the board did not even try to boot the kernel.
BTW, which bootstrap version do you use? (As I
suspect the bootstrap has
enabled for supporting 16bit NAND, so it
read u-boot OK)
The At91bootstrap indeed loads U-boot OK. The problem is afterward.
U-Boot 2012.10-00075-g0362411-dirty (Mar 15 2013 - 11:33:53)
U-Boot code: 73F00000 -> 73F370C0 BSS: -> 73F79654 CPU: AT91SAM9G45 Crystal frequency: 12 MHz CPU clock : 400 MHz Master clock : 133.333 MHz dram_init dram_init tam_ram=67108864 testa_ram_readonly: Inicio testa_ram_readonly: Fim monitor len: 00079654 ramsize: 04000000 TLB table at: 73ff0000 Top of RAM usable for U-Boot at: 73ff0000 Reserving 485k for U-Boot at: 73f76000 Reserving 640k for malloc() at: 73ed6000 Reserving 32 Bytes for Board Info at: 73ed5fe0 Reserving 144 Bytes for Global Data at: 73ed5f50 New Stack Pointer is: 73ed5f40 comeca a configurar a DRAM Display DRAM display_dram_config: DRAM: 64 MiB reloca e perde o controle 00000000
relocation Offset is: 00076000 board_init_r: gd=73ed5f50 WARNING: Caches not enabled monitor flash len: 0003C950 Now running in RAM - U-Boot at: 73f76000 NAND: 256 MiB board_init_r: Initialize Environmet env_relocate: Inicio gd=73ed5f50 gd->env_valid=0 Using default environment
env_relocate: Fim board_init_r: jumptable board_init_r: jumptable sai In: serial Out: serial Err: serial board_init_r:interrupts board_init_r: initialize board_init_r: main loop ### main_loop entered: bootdelay=3
### main_loop: bootcmd="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x200000, size 0x300000 3145728 bytes read: OK * kernel: cmdline image address = 0x70000000 ## Booting kernel from Legacy Image at 70000000 ... Image Name: Linux-2.6.39.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3630052 Bytes = 3.5 MiB Load Address: 70008000 Entry Point: 70008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image!
-- View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-aft... Sent from the U-Boot mailing list archive at Nabble.com.