=> reset resetting ... HTLLCLLC U-Boot 2014.04-g72d5154-dirty (Jul 01 2014 - 00:58:41) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: NAND, 3V3 DRAM: 64 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: usb_ether [PRIME] Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed. Hit any key to stop autoboot: 0 => run test_usb 64 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 63 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 62 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 61 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 60 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 5f using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 5e using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 5d using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 5c using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 5b using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 5a using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 59 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 58 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 57 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 56 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 55 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 54 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 53 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 52 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 51 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 50 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 4f using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 4e using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 4d using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 4c using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 4b using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() 4a using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet USB network up! Using usb_ether device TFTP from server 10.0.0.1; our IP address is 10.0.0.2 Filename 'rootfs.ubifs'. Load address: 0x40008000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 5.7 MiB/s done Bytes transferred = 13205504 (c98000 hex) 49 using ci_udc, OUT ep- IN ep- STATUS ep- MAC 00:19:b8:00:00:02 HOST MAC 00:19:b8:00:00:01 high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet ERROR: The remote end did not respond in time. at drivers/usb/gadget/ether.c:2388/usb_eth_init() =>