In order to make the default boot scripts more flexible, use the variable 'disk' to specify the disk device number and the variable 'part' to specify the partition number.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- include/configs/gw_ventana.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 874bb04..3aeb0df 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -281,6 +281,8 @@ \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ + "disk=0\0" \ + "part=1\0" \ \ "fdt_high=0xffffffff\0" \ "fdt_addr=0x18000000\0" \ @@ -304,8 +306,8 @@ "uimage=uImage\0" \ "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \ "mmc_boot=" \ - "setenv fsload 'ext2load mmc 0:1'; " \ - "mmc dev 0 && mmc rescan && " \ + "setenv fsload "ext2load mmc ${disk}:${part}"; " \ + "mmc dev ${disk} && mmc rescan && " \ "setenv dtype mmc; run loadscript; " \ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \ @@ -319,7 +321,8 @@ "fi\0" \ \ "sata_boot=" \ - "setenv fsload 'ext2load sata 0:1'; sata init && " \ + "setenv fsload "ext2load sata ${disk}:${part}"; " \ + "sata init && " \ "setenv dtype sata; run loadscript; " \ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \ @@ -332,7 +335,8 @@ "fi; " \ "fi\0" \ "usb_boot=" \ - "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \ + "setenv fsload "ext2load usb ${disk}:${part}"; " \ + "usb start && usb dev ${disk} && " \ "setenv dtype usb; run loadscript; " \ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \