Dear kevin.morfitt
2009/10/10 kevin.morfitt@fearnside-systems.co.uk kevin.morfitt@fearnside-systems.co.uk:
This patch re-formats the arm920t s3c24x0 driver files, excluding the nand driver, in preparation for changes to add support for the Embest SBC2440-II Board.
The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports
It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
- patches 1/4 and 2/4 of this series
Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have any s3c2400 or s3c2410 boards but need this patch applying before I can submit patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400, smdk2410 and trab configs to use the mtd nand driver (which isn't used by any board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or errors were found.
Signed-off-by: Kevin Morfitt kevin.morfitt@fearnside-systems.co.uk
Changes in v2: re-formatted patch to remove line wrapping Changes in v3: removed checkpatch.pl errors moved change log
board/mpl/vcma9/vcma9.c | 13 +- board/mpl/vcma9/vcma9.h | 20 ++-- board/samsung/smdk2400/smdk2400.c | 5 +- board/samsung/smdk2410/smdk2410.c | 5 +- board/sbc2410x/sbc2410x.c | 7 +- board/trab/cmd_trab.c | 12 +- board/trab/rs485.c | 12 +- board/trab/trab.c | 17 ++- board/trab/trab_fkt.c | 26 ++-- board/trab/tsc2000.c | 17 ++- board/trab/tsc2000.h | 4 +- board/trab/vfd.c | 12 +- drivers/i2c/s3c24x0_i2c.c | 273 +++++++++++++++++++------------------ drivers/rtc/s3c24x0_rtc.c | 130 +++++++++--------- drivers/serial/serial_s3c24x0.c | 160 ++++++++++++---------- 15 files changed, 374 insertions(+), 339 deletions(-)
applied to u-boot-samsung
Thanks Minkyu Kang