From: Paul Burton paul.burton@imgtec.com
Add driver for the JZ47xx MSC controller.
Cc: Daniel Schwierzeck daniel.schwierzeck@gmail.com Signed-off-by: Paul Burton paul.burton@imgtec.com Signed-off-by: Marek Vasut marek.vasut@gmail.com Signed-off-by: Ezequiel Garcia ezequiel@collabora.com Reviewed-by: Marek Vasut marex@denx.de --- drivers/mmc/Kconfig | 6 + drivers/mmc/Makefile | 1 + drivers/mmc/jz_mmc. | 0 drivers/mmc/jz_mmc.c | 489 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 496 insertions(+) create mode 100644 drivers/mmc/jz_mmc. create mode 100644 drivers/mmc/jz_mmc.c
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index fbd13964a084..496b2cba6405 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -332,6 +332,12 @@ config MMC_BCM2835
If unsure, say N.
+config JZ47XX_MMC + bool "Ingenic JZ47xx SD/MMC Host Controller support" + depends on ARCH_JZ47XX + help + This selects support for the SD Card Controller on Ingenic JZ47xx SoCs. + config MMC_SANDBOX bool "Sandbox MMC support" depends on SANDBOX diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 801a26d82192..7892c468f05c 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_MMC_SANDBOX) += sandbox_mmc.o obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_SH_SDHI) += sh_sdhi.o obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o +obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
# SDHCI obj-$(CONFIG_MMC_SDHCI) += sdhci.o diff --git a/drivers/mmc/jz_mmc. b/drivers/mmc/jz_mmc. new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/drivers/mmc/jz_mmc.c b/drivers/mmc/jz_mmc.c new file mode 100644 index 000000000000..2e92fa16e6c8 --- /dev/null +++ b/drivers/mmc/jz_mmc.c @@ -0,0 +1,489 @@ +/* + * Ingenic JZ MMC driver + * + * Copyright (c) 2013 Imagination Technologies + * Author: Paul Burton paul.burton@imgtec.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/unaligned.h> +#include <errno.h> +#include <mach/jz4780.h> +#include <wait_bit.h> + +/* Registers */ +#define MSC_STRPCL 0x000 +#define MSC_STAT 0x004 +#define MSC_CLKRT 0x008 +#define MSC_CMDAT 0x00c +#define MSC_RESTO 0x010 +#define MSC_RDTO 0x014 +#define MSC_BLKLEN 0x018 +#define MSC_NOB 0x01c +#define MSC_SNOB 0x020 +#define MSC_IMASK 0x024 +#define MSC_IREG 0x028 +#define MSC_CMD 0x02c +#define MSC_ARG 0x030 +#define MSC_RES 0x034 +#define MSC_RXFIFO 0x038 +#define MSC_TXFIFO 0x03c +#define MSC_LPM 0x040 +#define MSC_DMAC 0x044 +#define MSC_DMANDA 0x048 +#define MSC_DMADA 0x04c +#define MSC_DMALEN 0x050 +#define MSC_DMACMD 0x054 +#define MSC_CTRL2 0x058 +#define MSC_RTCNT 0x05c +#define MSC_DBG 0x0fc + +/* MSC Clock and Control Register (MSC_STRPCL) */ +#define MSC_STRPCL_EXIT_MULTIPLE BIT(7) +#define MSC_STRPCL_EXIT_TRANSFER BIT(6) +#define MSC_STRPCL_START_READWAIT BIT(5) +#define MSC_STRPCL_STOP_READWAIT BIT(4) +#define MSC_STRPCL_RESET BIT(3) +#define MSC_STRPCL_START_OP BIT(2) +#define MSC_STRPCL_CLOCK_CONTROL_STOP BIT(0) +#define MSC_STRPCL_CLOCK_CONTROL_START BIT(1) + +/* MSC Status Register (MSC_STAT) */ +#define MSC_STAT_AUTO_CMD_DONE BIT(31) +#define MSC_STAT_IS_RESETTING BIT(15) +#define MSC_STAT_SDIO_INT_ACTIVE BIT(14) +#define MSC_STAT_PRG_DONE BIT(13) +#define MSC_STAT_DATA_TRAN_DONE BIT(12) +#define MSC_STAT_END_CMD_RES BIT(11) +#define MSC_STAT_DATA_FIFO_AFULL BIT(10) +#define MSC_STAT_IS_READWAIT BIT(9) +#define MSC_STAT_CLK_EN BIT(8) +#define MSC_STAT_DATA_FIFO_FULL BIT(7) +#define MSC_STAT_DATA_FIFO_EMPTY BIT(6) +#define MSC_STAT_CRC_RES_ERR BIT(5) +#define MSC_STAT_CRC_READ_ERROR BIT(4) +#define MSC_STAT_CRC_WRITE_ERROR BIT(2) +#define MSC_STAT_CRC_WRITE_ERROR_NOSTS BIT(4) +#define MSC_STAT_TIME_OUT_RES BIT(1) +#define MSC_STAT_TIME_OUT_READ BIT(0) + +/* MSC Bus Clock Control Register (MSC_CLKRT) */ +#define MSC_CLKRT_CLK_RATE_MASK 0x7 + +/* MSC Command Sequence Control Register (MSC_CMDAT) */ +#define MSC_CMDAT_IO_ABORT BIT(11) +#define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << 9) +#define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << 9) +#define MSC_CMDAT_DMA_EN BIT(8) +#define MSC_CMDAT_INIT BIT(7) +#define MSC_CMDAT_BUSY BIT(6) +#define MSC_CMDAT_STREAM_BLOCK BIT(5) +#define MSC_CMDAT_WRITE BIT(4) +#define MSC_CMDAT_DATA_EN BIT(3) +#define MSC_CMDAT_RESPONSE_MASK (0x7 << 0) +#define MSC_CMDAT_RESPONSE_NONE (0x0 << 0) /* No response */ +#define MSC_CMDAT_RESPONSE_R1 (0x1 << 0) /* Format R1 and R1b */ +#define MSC_CMDAT_RESPONSE_R2 (0x2 << 0) /* Format R2 */ +#define MSC_CMDAT_RESPONSE_R3 (0x3 << 0) /* Format R3 */ +#define MSC_CMDAT_RESPONSE_R4 (0x4 << 0) /* Format R4 */ +#define MSC_CMDAT_RESPONSE_R5 (0x5 << 0) /* Format R5 */ +#define MSC_CMDAT_RESPONSE_R6 (0x6 << 0) /* Format R6 */ + +/* MSC Interrupts Mask Register (MSC_IMASK) */ +#define MSC_IMASK_TIME_OUT_RES BIT(9) +#define MSC_IMASK_TIME_OUT_READ BIT(8) +#define MSC_IMASK_SDIO BIT(7) +#define MSC_IMASK_TXFIFO_WR_REQ BIT(6) +#define MSC_IMASK_RXFIFO_RD_REQ BIT(5) +#define MSC_IMASK_END_CMD_RES BIT(2) +#define MSC_IMASK_PRG_DONE BIT(1) +#define MSC_IMASK_DATA_TRAN_DONE BIT(0) + +/* MSC Interrupts Status Register (MSC_IREG) */ +#define MSC_IREG_TIME_OUT_RES BIT(9) +#define MSC_IREG_TIME_OUT_READ BIT(8) +#define MSC_IREG_SDIO BIT(7) +#define MSC_IREG_TXFIFO_WR_REQ BIT(6) +#define MSC_IREG_RXFIFO_RD_REQ BIT(5) +#define MSC_IREG_END_CMD_RES BIT(2) +#define MSC_IREG_PRG_DONE BIT(1) +#define MSC_IREG_DATA_TRAN_DONE BIT(0) + +struct jz_mmc_plat { + struct mmc_config cfg; + struct mmc mmc; +}; + +struct jz_mmc_priv { + void __iomem *regs; + u32 flags; +/* priv flags */ +#define JZ_MMC_BUS_WIDTH_MASK 0x3 +#define JZ_MMC_BUS_WIDTH_1 0x0 +#define JZ_MMC_BUS_WIDTH_4 0x2 +#define JZ_MMC_BUS_WIDTH_8 0x3 +#define JZ_MMC_SENT_INIT BIT(2) +}; + +static int jz_mmc_clock_rate(void) +{ + return 24000000; +} + +static int jz_mmc_send_cmd(struct mmc *mmc, struct jz_mmc_priv *priv, + struct mmc_cmd *cmd, struct mmc_data *data) +{ + u32 stat, mask, cmdat = 0; + int i, ret; + + /* stop the clock */ + writel(MSC_STRPCL_CLOCK_CONTROL_STOP, priv->regs + MSC_STRPCL); + ret = wait_for_bit_le32(priv->regs + MSC_STAT, + MSC_STAT_CLK_EN, false, 10000, false); + if (ret) + return ret; + + writel(0, priv->regs + MSC_DMAC); + + /* setup command */ + writel(cmd->cmdidx, priv->regs + MSC_CMD); + writel(cmd->cmdarg, priv->regs + MSC_ARG); + + if (data) { + /* setup data */ + cmdat |= MSC_CMDAT_DATA_EN; + if (data->flags & MMC_DATA_WRITE) + cmdat |= MSC_CMDAT_WRITE; + + writel(data->blocks, priv->regs + MSC_NOB); + writel(data->blocksize, priv->regs + MSC_BLKLEN); + } else { + writel(0, priv->regs + MSC_NOB); + writel(0, priv->regs + MSC_BLKLEN); + } + + /* setup response */ + switch (cmd->resp_type) { + case MMC_RSP_NONE: + break; + case MMC_RSP_R1: + case MMC_RSP_R1b: + cmdat |= MSC_CMDAT_RESPONSE_R1; + break; + case MMC_RSP_R2: + cmdat |= MSC_CMDAT_RESPONSE_R2; + break; + case MMC_RSP_R3: + cmdat |= MSC_CMDAT_RESPONSE_R3; + break; + default: + break; + } + + if (cmd->resp_type & MMC_RSP_BUSY) + cmdat |= MSC_CMDAT_BUSY; + + /* set init for the first command only */ + if (!(priv->flags & JZ_MMC_SENT_INIT)) { + cmdat |= MSC_CMDAT_INIT; + priv->flags |= JZ_MMC_SENT_INIT; + } + + cmdat |= (priv->flags & JZ_MMC_BUS_WIDTH_MASK) << 9; + + /* write the data setup */ + writel(cmdat, priv->regs + MSC_CMDAT); + + /* unmask interrupts */ + mask = 0xffffffff & ~(MSC_IMASK_END_CMD_RES | MSC_IMASK_TIME_OUT_RES); + if (data) { + mask &= ~MSC_IMASK_DATA_TRAN_DONE; + if (data->flags & MMC_DATA_WRITE) { + mask &= ~MSC_IMASK_TXFIFO_WR_REQ; + } else { + mask &= ~(MSC_IMASK_RXFIFO_RD_REQ | + MSC_IMASK_TIME_OUT_READ); + } + } + writel(mask, priv->regs + MSC_IMASK); + + /* clear interrupts */ + writel(0xffffffff, priv->regs + MSC_IREG); + + /* start the command (& the clock) */ + writel(MSC_STRPCL_START_OP | MSC_STRPCL_CLOCK_CONTROL_START, + priv->regs + MSC_STRPCL); + + /* wait for completion */ + for (i = 0; i < 100; i++) { + stat = readl(priv->regs + MSC_IREG); + stat &= MSC_IREG_END_CMD_RES | MSC_IREG_TIME_OUT_RES; + if (stat) + break; + mdelay(1); + } + writel(stat, priv->regs + MSC_IREG); + if (stat & MSC_IREG_TIME_OUT_RES) + return -ETIMEDOUT; + + if (cmd->resp_type & MMC_RSP_PRESENT) { + /* read the response */ + if (cmd->resp_type & MMC_RSP_136) { + u16 a, b, c, i; + + a = readw(priv->regs + MSC_RES); + for (i = 0; i < 4; i++) { + b = readw(priv->regs + MSC_RES); + c = readw(priv->regs + MSC_RES); + cmd->response[i] = + (a << 24) | (b << 8) | (c >> 8); + a = c; + } + } else { + cmd->response[0] = readw(priv->regs + MSC_RES) << 24; + cmd->response[0] |= readw(priv->regs + MSC_RES) << 8; + cmd->response[0] |= readw(priv->regs + MSC_RES) & 0xff; + } + } + + if (data && (data->flags & MMC_DATA_WRITE)) { + /* write the data */ + int sz = DIV_ROUND_UP(data->blocks * data->blocksize, 4); + const void *buf = data->src; + + while (sz--) { + u32 val = get_unaligned_le32(buf); + + wait_for_bit_le32(priv->regs + MSC_IREG, + MSC_IREG_TXFIFO_WR_REQ, + true, 10000, false); + writel(val, priv->regs + MSC_TXFIFO); + buf += 4; + } + } else if (data && (data->flags & MMC_DATA_READ)) { + /* read the data */ + int sz = data->blocks * data->blocksize; + void *buf = data->dest; + + do { + stat = readl(priv->regs + MSC_STAT); + + if (stat & MSC_STAT_TIME_OUT_READ) + return -ETIMEDOUT; + if (stat & MSC_STAT_CRC_READ_ERROR) + return -EINVAL; + if (stat & MSC_STAT_DATA_FIFO_EMPTY) { + udelay(10); + continue; + } + do { + u32 val = readl(priv->regs + MSC_RXFIFO); + + if (sz == 1) + *(u8 *)buf = (u8)val; + else if (sz == 2) + put_unaligned_le16(val, buf); + else if (sz >= 4) + put_unaligned_le32(val, buf); + buf += 4; + sz -= 4; + stat = readl(priv->regs + MSC_STAT); + } while (!(stat & MSC_STAT_DATA_FIFO_EMPTY)); + } while (!(stat & MSC_STAT_DATA_TRAN_DONE)); + } + + return 0; +} + +static int jz_mmc_set_ios(struct mmc *mmc, struct jz_mmc_priv *priv) +{ + u32 real_rate = jz_mmc_clock_rate(); + u8 clk_div = 0; + + /* calculate clock divide */ + while ((real_rate > mmc->clock) && (clk_div < 7)) { + real_rate >>= 1; + clk_div++; + } + writel(clk_div & MSC_CLKRT_CLK_RATE_MASK, priv->regs + MSC_CLKRT); + + /* set the bus width for the next command */ + priv->flags &= ~JZ_MMC_BUS_WIDTH_MASK; + if (mmc->bus_width == 8) + priv->flags |= JZ_MMC_BUS_WIDTH_8; + else if (mmc->bus_width == 4) + priv->flags |= JZ_MMC_BUS_WIDTH_4; + else + priv->flags |= JZ_MMC_BUS_WIDTH_1; + + return 0; +} + +static int jz_mmc_core_init(struct mmc *mmc) +{ + struct jz_mmc_priv *priv = mmc->priv; + int ret; + + /* Reset */ + writel(MSC_STRPCL_RESET, priv->regs + MSC_STRPCL); + ret = wait_for_bit_le32(priv->regs + MSC_STAT, + MSC_STAT_IS_RESETTING, false, 10000, false); + if (ret) + return ret; + + /* Maximum timeouts */ + writel(0xffff, priv->regs + MSC_RESTO); + writel(0xffffffff, priv->regs + MSC_RDTO); + + /* Enable low power mode */ + writel(0x1, priv->regs + MSC_LPM); + + return 0; +} + +#if !CONFIG_IS_ENABLED(DM_MMC) + +static int jz_mmc_legacy_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct jz_mmc_priv *priv = mmc->priv; + + return jz_mmc_send_cmd(mmc, priv, cmd, data); +} + +static int jz_mmc_legacy_set_ios(struct mmc *mmc) +{ + struct jz_mmc_priv *priv = mmc->priv; + + return jz_mmc_set_ios(mmc, priv); +}; + +static const struct mmc_ops jz_msc_ops = { + .send_cmd = jz_mmc_legacy_send_cmd, + .set_ios = jz_mmc_legacy_set_ios, + .init = jz_mmc_core_init, +}; + +static struct jz_mmc_priv jz_mmc_priv_static; +static struct jz_mmc_plat jz_mmc_plat_static = { + .cfg = { + .name = "MSC", + .ops = &jz_msc_ops, + + .voltages = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | + MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | + MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36, + .host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS, + + .f_min = 375000, + .f_max = 48000000, + .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, + }, +}; + +int jz_mmc_init(void __iomem *base) +{ + struct mmc *mmc; + + jz_mmc_priv_static.regs = base; + + mmc = mmc_create(&jz_mmc_plat_static.cfg, &jz_mmc_priv_static); + + return mmc ? 0 : -ENODEV; +} + +#else /* CONFIG_DM_MMC */ + +#include <dm.h> +DECLARE_GLOBAL_DATA_PTR; + +static int jz_mmc_dm_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct jz_mmc_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + + return jz_mmc_send_cmd(mmc, priv, cmd, data); +} + +static int jz_mmc_dm_set_ios(struct udevice *dev) +{ + struct jz_mmc_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + + return jz_mmc_set_ios(mmc, priv); +}; + +static const struct dm_mmc_ops jz_msc_ops = { + .send_cmd = jz_mmc_dm_send_cmd, + .set_ios = jz_mmc_dm_set_ios, +}; + +static int jz_mmc_ofdata_to_platdata(struct udevice *dev) +{ + struct jz_mmc_priv *priv = dev_get_priv(dev); + struct jz_mmc_plat *plat = dev_get_platdata(dev); + struct mmc_config *cfg; + int ret; + + priv->regs = map_physmem(devfdt_get_addr(dev), 0x100, MAP_NOCACHE); + cfg = &plat->cfg; + + cfg->name = "MSC"; + cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; + + ret = mmc_of_parse(dev, cfg); + if (ret < 0) { + dev_err(dev, "failed to parse host caps\n"); + return ret; + } + + cfg->f_min = 400000; + cfg->f_max = 52000000; + + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + + return 0; +} + +static int jz_mmc_bind(struct udevice *dev) +{ + struct jz_mmc_plat *plat = dev_get_platdata(dev); + + return mmc_bind(dev, &plat->mmc, &plat->cfg); +} + +static int jz_mmc_probe(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct jz_mmc_priv *priv = dev_get_priv(dev); + struct jz_mmc_plat *plat = dev_get_platdata(dev); + + plat->mmc.priv = priv; + upriv->mmc = &plat->mmc; + return jz_mmc_core_init(&plat->mmc); +} + +static const struct udevice_id jz_mmc_ids[] = { + { .compatible = "ingenic,jz4780-mmc" }, + { } +}; + +U_BOOT_DRIVER(jz_mmc_drv) = { + .name = "jz_mmc", + .id = UCLASS_MMC, + .of_match = jz_mmc_ids, + .ofdata_to_platdata = jz_mmc_ofdata_to_platdata, + .bind = jz_mmc_bind, + .probe = jz_mmc_probe, + .priv_auto_alloc_size = sizeof(struct jz_mmc_priv), + .platdata_auto_alloc_size = sizeof(struct jz_mmc_plat), + .ops = &jz_msc_ops, +}; +#endif /* CONFIG_DM_MMC */