Dear ladys and gentleman,
according the setup in [setup] I want to enable the SIL Image 3124/3132 PCI/SATA converter in UBOOT (u-boot-2018.03) on an IMX6SX CPU.
I tested the implementation and the setup via the Linux Kernel (see Kernel config in [kernel config] in Linux (see lspci [kernel]). After I enabled PCI in UBOOT I got the working result according [UBOOT].
But the SATA implementation (see complete config [defconfig]) failed during compilation of UBOOT with "arch/arm/mach-imx/mx6/clock.c:1015:32: error: 'MXC_CCM_CCGR5_SATA_MASK' undeclared (first use in this function); did you mean 'MXC_CCM_CCGR5_SAI1_MASK'?".
Is it possible to only read from an attached SSD on the SIL Image 31xx PCI/SATA converter via PCI in UBOOT?
P.s.: There are different warnings and notes during compilation (see [warnings]).
[setup]: | imx6sx (UBOOT) | <---PCI---> | Silicon Image 3124/3132 SATA | <--- SATA ---> | SSD |
[kernel config]: # enable pci in kernel (PCI support) # enable express support (PCI Express Port Bus support) # PCI host controller drivers (Freescale i.MX6 PCIe controller) # enable sata driver in kernel (Serial ATA and Parallel ATA drivers) # enable PCI-SATA interface in kernel: AHCI SATA support Platform AHCI SATA support … Silicon Image 3124/3132 SATA support # enable pci in device-tree (#define CONFIG_EFUSA9X_PCIE)
[kernel]: $ lspci 00:00.0 Class 0604: 16c3:abcd 01:00.0 Class 0106: 1b21:0612
[UBOOT]: PCI: 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 1b21:0612 - Mass storage controller
efusA9X # pci Scanning PCI devices on bus 0 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.01.00 0x16c3 0xabcd Build before PCI Rev2.0 0x00
[defconfig]: $ diff -us configs/fsimx6sx_efus_defconfig .config | grep ^+ +++ .config 2020-01-09 16:30:41.073863186 +0100 +CONFIG_AHCI=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y +CONFIG_SATA=y +CONFIG_LIBATA=y +CONFIG_AHCI_PCI=y +# CONFIG_SATA_CEVA is not set +# CONFIG_DWC_AHCI is not set +CONFIG_SATA_SIL=y +CONFIG_BLK=y +# CONFIG_NVME is not set +CONFIG_PCI=y +# CONFIG_DM_PCI is not set +# CONFIG_PCI_PNP is not set +CONFIG_DM_SCSI=y
[warnings]: $ make clean all … include/generated/autoconf.h:99: note: this is the location of the previous definition #define CONFIG_PCI 1
CC arch/arm/mach-imx/i2c-mxv7.o In file included from include/config.h:6, from include/common.h:21, from arch/arm/mach-imx/i2c-mxv7.c:6: include/configs/fsimx6sx.h:296: warning: "CONFIG_PCI" redefined #define CONFIG_PCI
…
In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:99: note: this is the location of the previous definition #define CONFIG_PCI 1
In file included from arch/arm/mach-imx/mx6/clock.c:9: arch/arm/mach-imx/mx6/clock.c: In function 'ungate_sata_clock': arch/arm/mach-imx/mx6/clock.c:1001:32: error: 'MXC_CCM_CCGR5_SATA_MASK' undeclared (first use in this function); did you mean 'MXC_CCM_CCGR5_SAI1_MASK'? setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); ^~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm/include/asm/io.h:49:61: note: in definition of macro '__arch_putl' #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) ^ ./arch/arm/include/asm/io.h:146:35: note: in expansion of macro '__raw_writel' #define out_arch(type,endian,a,v) __raw_write##type(cpu_to_##endian(v),a) ^~~~~~~~~~~ include/linux/byteorder/generic.h:89:21: note: in expansion of macro '__cpu_to_le32' #define cpu_to_le32 __cpu_to_le32 ^~~~~~~~~~~~~ ./arch/arm/include/asm/io.h:150:23: note: in expansion of macro 'out_arch' #define out_le32(a,v) out_arch(l,le32,a,v) ^~~~~~~~ ./arch/arm/include/asm/io.h:170:2: note: in expansion of macro 'out_le32' out_##type((addr), in_##type(addr) | (set)) ^~~~ ./arch/arm/include/asm/io.h:180:33: note: in expansion of macro 'setbits' #define setbits_le32(addr, set) setbits(le32, addr, set) ^~~~~~~ arch/arm/mach-imx/mx6/clock.c:1001:2: note: in expansion of macro 'setbits_le32' setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); ^~~~~~~~~~~~ arch/arm/mach-imx/mx6/clock.c:1001:32: note: each undeclared identifier is reported only once for each function it appears in setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); ^~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm/include/asm/io.h:49:61: note: in definition of macro '__arch_putl' #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) ^ ./arch/arm/include/asm/io.h:146:35: note: in expansion of macro '__raw_writel' #define out_arch(type,endian,a,v) __raw_write##type(cpu_to_##endian(v),a) ^~~~~~~~~~~ include/linux/byteorder/generic.h:89:21: note: in expansion of macro '__cpu_to_le32' #define cpu_to_le32 __cpu_to_le32 ^~~~~~~~~~~~~ ./arch/arm/include/asm/io.h:150:23: note: in expansion of macro 'out_arch' #define out_le32(a,v) out_arch(l,le32,a,v) ^~~~~~~~ ./arch/arm/include/asm/io.h:170:2: note: in expansion of macro 'out_le32' out_##type((addr), in_##type(addr) | (set)) ^~~~ ./arch/arm/include/asm/io.h:180:33: note: in expansion of macro 'setbits' #define setbits_le32(addr, set) setbits(le32, addr, set) ^~~~~~~ arch/arm/mach-imx/mx6/clock.c:1001:2: note: in expansion of macro 'setbits_le32' setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); ^~~~~~~~~~~~ arch/arm/mach-imx/mx6/clock.c: In function 'disable_sata_clock': arch/arm/mach-imx/mx6/clock.c:1015:32: error: 'MXC_CCM_CCGR5_SATA_MASK' undeclared (first use in this function); did you mean 'MXC_CCM_CCGR5_SAI1_MASK'? clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); ^~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm/include/asm/io.h:49:61: note: in definition of macro '__arch_putl' #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) ^ ./arch/arm/include/asm/io.h:146:35: note: in expansion of macro '__raw_writel' #define out_arch(type,endian,a,v) __raw_write##type(cpu_to_##endian(v),a) ^~~~~~~~~~~ include/linux/byteorder/generic.h:89:21: note: in expansion of macro '__cpu_to_le32' #define cpu_to_le32 __cpu_to_le32 ^~~~~~~~~~~~~ ./arch/arm/include/asm/io.h:150:23: note: in expansion of macro 'out_arch' #define out_le32(a,v) out_arch(l,le32,a,v) ^~~~~~~~ ./arch/arm/include/asm/io.h:167:2: note: in expansion of macro 'out_le32' out_##type((addr), in_##type(addr) & ~(clear)) ^~~~ ./arch/arm/include/asm/io.h:179:35: note: in expansion of macro 'clrbits' #define clrbits_le32(addr, clear) clrbits(le32, addr, clear) ^~~~~~~ arch/arm/mach-imx/mx6/clock.c:1015:2: note: in expansion of macro 'clrbits_le32' clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK); ^~~~~~~~~~~~ make[2]: *** [arch/arm/mach-imx/mx6/clock.o] Fehler 1 scripts/Makefile.build:280: die Regel für Ziel „arch/arm/mach-imx/mx6/clock.o“ scheiterte scripts/Makefile.build:425: die Regel für Ziel „arch/arm/mach-imx/mx6“ scheiterte make[1]: *** [arch/arm/mach-imx/mx6] Fehler 2 Makefile:1343: die Regel für Ziel „arch/arm/mach-imx“ scheiterte make: *** [arch/arm/mach-imx] Fehler 2
Mit freundlichen Grüßen / Best regards
Maik Brenke Embedded Linux Developer