Hi Scott,
-----Original Message----- From: Scott Wood [mailto:scottwood@freescale.com] Sent: Friday, November 06, 2015 10:33 PM To: Siva Durga Prasad Paladugu Cc: u-boot@lists.denx.de; Michal Simek; Siva Durga Prasad Paladugu Subject: Re: [UBOOT PATCH v2 1/2] zynqmp: nand: Add Nand driver support for zynqmp
On Fri, 2015-11-06 at 16:52 +0530, Siva Durga Prasad Paladugu wrote:
Add nand driver support for zynqmp. The Nand controller used in ZynqMP is Arasan Nand Flash controller.
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com
Changes from v1:
- Newly added in series
arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/include/asm/arch-zynqmp/hardware.h | 2 ++ configs/xilinx_zynqmp_ep_defconfig | 1 + include/configs/xilinx_zynqmp.h | 9 +++++++++ 4 files changed, 15 insertions(+)
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig index e5a4fdd..161954f 100644 --- a/arch/arm/cpu/armv8/zynqmp/Kconfig +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig @@ -27,4 +27,7 @@ config SECURE_IOU config ZYNQMP_USB bool "Configure ZynqMP USB"
+config NAND_ARASAN
bool "Configure Arasan Nand"endif
This should go in drivers/mtd/nand/Kconfig.
Ok, I will consider it in V2. Do you have any further comments on 2nd patch in the series? If not, please take it up.
Regards, Siva
-Scott