There is a new step now. The need to build the u-boot.itb. And instead of flashing the .img file, now the .itb file needs to be flashed.
Signed-off-by: Abel Vesa abel.vesa@nxp.com --- board/freescale/mx6sabreauto/README | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README index e8c589b..960a7d7 100644 --- a/board/freescale/mx6sabreauto/README +++ b/board/freescale/mx6sabreauto/README @@ -8,6 +8,7 @@ In order to build it: $ make mx6sabreauto_defconfig
$ make +$ make u-boot.itb
This will generate the SPL and u-boot.img binaries.
@@ -17,7 +18,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
- Flash the u-boot.img binary into the SD card:
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync +$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
Booting via Falcon mode ----------------------- @@ -31,6 +32,7 @@ In order to build it: $ make mx6sabreauto_defconfig
$ make +$ make u-boot.itb
This will generate the SPL image called SPL and the u-boot.img.
@@ -40,7 +42,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
- Flash the u-boot.img image into the SD card:
-$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync +$ sudo dd if=u-boot.itb of=/dev/sdb bs=1K seek=69 && sync
Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there: