22 Jun
2005
22 Jun
'05
9:52 a.m.
Sam Song writes:
Yuli> For MONITOR_BASE=TEXT_ADDR=0xFFF00000 you need Yuli> CFG_FLASH_BASE=0xFF800000. Check BDI initialisations and set Yuli> the HRCW to get the same values.
Sam> Really? Sounds CFG_FLASH_BASE=0xFE000000 is also OK for HIGH Sam> BOOT situation. Am I right?
Generally speaking, it depends on the chip select initialisations. If you set correct size (8MB in this case), TEXT_ADDR will not be mapped at all with such CFG_FLASH_BASE=0xFE000000.
--
========================================================================
Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader
yuli@arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel
========================================================================