Hi all,

I am working on getting USB-uboot working on OSK5912.
from linux USB gadget "device controller drivers" (i.e. kernel/drivers/usb/gadget/) it looks like
USB core for omap1510 and OSK5912 is same..But not sure, please confirm

I done following steps.
1)make mrproper
2)make omap5912osk_config
3)go to include/configs/omap5912osk.h
  and edit this file with following macros.
.
#define CONFIG_DOS_PARTITION  1
        
#define CONFIG_USB_OHCI         1
#define CONFIG_USB_OHCI_NEW             1
#define CFG_USB_OHCI_MAX_ROOT_PORTS       1
#define CFG_USB_OHCI_SLOT_NAME        "osk5912"
#define CFG_USB_OHCI_REGS_BASE        0xfffba000
#define CONFIG_USB_STORAGE 1

#define CFG_USB_OHCI_BOARD_INIT 1
#define CFG_USB_OHCI_CPU_INIT 1
   
#define CONFIG_CMD_USB          1

4)after this, I am able to see USB command enabled on Uboot console.
  but I am not able to see Mass-storage detected after inserting pendrive and doing "usb start"

5) from docs/README.generic_usb_ohci, It looks like usb_board_init/stop and usb_cpu_init/stop
   functions are missing and needs to be implemented.

for above all, I am using omap1510 code. but I am not sure will this code work or not?

also I am not sure, why "usb_board_init/stop and usb_cpu_init/stop" code is not included in git for
enabling USB uboot on omap1510 or is I am missing any thing?

Please, needs help/confirmation that I can make USB-Uboot work on OSK5912.

Thanks for any help..

Thanks and Regards,
Shivdas Gujare