This series implements the "fastboot flash" command for eMMC devices. It supports both raw and sparse images.
NOTES: - the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH - the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV - (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???) - thus the proposal is to place the code in common/fb_mmc.c and (future) common/fb_nand.c(???), however, this may not be the appropriate location....
This has been tested on ARMv7. This is a WIP -- and I would appreciate some comments/advice... Thanks, Steve
Steve Rae (3): usb/gadget: fastboot: add sparse image definitions usb/gadget: fastboot: add eMMC support for flash command usb/gadget: fastboot: add support for flash command
README | 10 +++ common/Makefile | 5 ++ common/fb_mmc.c | 144 ++++++++++++++++++++++++++++++++++++++++ doc/README.android-fastboot | 5 +- drivers/usb/gadget/f_fastboot.c | 31 +++++++++ include/fb_mmc.h | 8 +++ include/sparse_format.h | 58 ++++++++++++++++ 7 files changed, 259 insertions(+), 2 deletions(-) create mode 100644 common/fb_mmc.c create mode 100644 include/fb_mmc.h create mode 100644 include/sparse_format.h