On 05. 12. 19 15:33, Tom Rini wrote:
On Thu, Dec 05, 2019 at 09:46:57AM +0100, Michal Simek wrote:
Follow i.MX, Sunxi, RISC-V and Rockchip to generate u-boot.itb which includes U-Boot proper, ATF and DTBs in FIT format. ZynqMP supports FIT for quite a long time but with using out of tree solution. The patch is filling this gap.
Tested on zcu102, zcu104 and zcu100/Ultra96.
zcu100/Ultra96 v2.2 ATF build by: make DEBUG=0 ZYNQMP_CONSOLE=cadence1 RESET_TO_BL31=1 PLAT=zynqmp bl31
Signed-off-by: Michal Simek michal.simek@xilinx.com
Changes in v2:
- Exchange u-boot/atf in config section
- Use default ATF baseaddr from mainline
- Update commit message
Kconfig | 3 +- arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 99 +++++++++++++++++++++++++
My only complaint here is adding and N'th version of mkimage_fit_atf.sh that varies seemingly only in addresses. Can we not abstract this enough to make it for everyone to use and pass in the needed values?
First of all I will be sending v3 because of other things I found.
Adding more folks to this.
I have went through all versions and here is sort of stat:
board/sunxi/mksunxi_fit_atf.sh - firmware is uboot, atf loadables (not standard)
board/theobroma-systems/puma_rk3399/fit_spl_atf.sh - license present atf, uboot, pmufw (only present here)
arch/arm/mach-rockchip/make_fit_atf.py - python (only one) and read addresses from elfs
arch/arm/mach-rockchip/fit_spl_optee.sh - firmware is tee(no ATF)
arch/riscv/lib/mkimage_fit_opensbi.sh - reads stuff from .config and also handles non DT case
arch/arm/mach-imx/mkimage_fit_atf.sh - optee, atf, incorrect dt nodes names
And of course this one.
-------------------------------
I think the key point here is to start talk about how this should be done. Language? One is python others are shell scripts.
Should it stop when ATF/TEE is not found?
What file to read to get information from u-boot? .config or include/generated/autoconf.h?
Read information about locations from ELFs?
Should we handle non DT case? Yes?
Move just DT generation to common location and keep VARs, file checking in board/arch scripts?
Thanks, Michal