Re: [PATCH] board: novtech: meerkat96: Add environment variables

Hi Carl,

do you used git send-email for this ? It looks like the patch was changed by your mailer, I cannot applied it with git am ("malformed patch"). Can you check and resend, maybe with git send-email ?

Best regards, SAtefano Babic

On 04.04.21 21:47, Carl Gelfand wrote:

Add environment variables for booting Linux on imx7d-meerkat96.

Signed-off-by: Carl Gelfand carlgelfand@gmail.com

include/configs/meerkat96.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/include/configs/meerkat96.h b/include/configs/meerkat96.h index f43a8415e1..f3a6906054 100644 --- a/include/configs/meerkat96.h +++ b/include/configs/meerkat96.h @@ -33,7 +33,21 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment configs */

+#define CONFIG_EXTRA_ENV_SETTINGS \

•   "image=zImage\0" \
  

•   "console=ttymxc5\0" \
  

•   "bootcmd=mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan;
  

then if run loadimage; then run mmcboot; else run netboot; fi; else run netboot; fi\0" \

•   "fdt_addr=0x83000000\0" \
  

•   "fdt_file=imx7d-meerkat96.dtb\0" \
  

•   "loadaddr=0x80800000\0" \
  

•   "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  

•   "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  

•   "mmcargs=setenv bootargs console=${console},${baudrate}
  

root=${mmcroot}\0" \

•   "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  

•   "boot_fdt=try\0" \
  

•   "mmcboot=echo Booting from mmc ...; run mmcargs; if test
  

${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;\0" \

•   "mmcdev=0\0" \
  

•   "mmcpart=1\0" \
  

  /* USB configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)

-- 2.20.1